It is an auto transmission V6 3.0 PETRO engine. Saloo
SOURCE: lost my key to my jaguar 2003 x-type, where can i get a new one
the only place that will have the sort of equipment to cut you a new key (the key has to be cut according to the vin number of the car), is going to be the dealership. also the computer equipment needed to program the new key is most likely only avaliable at the dealer.
SOURCE: Unlocking Boot lid
I am assuming your problem is similar to mine; the key fob isn't dead, but for some reason the boot won't release. This happens rarely, but can be very frustrating (and embarrassing)!
When neither the key fob nor the release on the boot work, lock and unlock the car, and insert the key into the ignition. Turn the key to the second stage, i.e. the accessories are powered, and then remove the key. This ought to allow you to use the fob again.
SOURCE: 2003 Jaguar S-Type, programming a key fob
The switchblade key would need to be compatable with your ignition switch barrel. Only normally available from jag dealers who check the Jag owners register before supplying you a replacement.
The older type seperate fobs could be programmed by switching the ignition on and off 8 times (allowing all functions to settle) and on the 9th switch on - press a button on each fob and then switch off. to test use a good fob to lock the car then try the reprogammed fob to unlock/lock. Sometimes this works first time - sometimes needs a couple of tries.
SOURCE: How do I program S Type Jaguar key fob Year 2000 Jag ?
Seperate key fobs only can be programmed in the following way.
Turn ignition on/off 8 x times (allow all functions to stabilise) after the 9th on - press a button on both remote fobs. then turn ign. off. use good remote to lock and then try new remote to unlock/lock. sometimes it works first time - sometimes you have to repeat actions. good luck.
SOURCE: 2003 Jaguar S-Type, programming a key fob
If its a new key fob the only way you can program it is this the factory scan tool, u'll have to take it to a dealership for them to do this and they will charge you .5 hrs for labor.only x-types can be programmed without the jaguar software. Im guessing it will cost you between 40 and 50 bucks to have them program it.
298 views
Usually answered in minutes!
×