Code P0441 is for evaporative purge performance and may be a false code which can be corrected by a newer computer flash update. This would be a free service at the dealer due to a -Rapid Response Transmittal- so call a dealer and have them run your VIN number to see if may apply due to build date of vehicle.
SOURCE: Evaporative emission system - small leak/no BB flow condition
Although I recommend you buy a Haynes service manual for your Dodge, I think you will find the canister attached to the firewall or one of the fender wells.
Most of them look a lot like an overgrown spam can and it will have two connections on it.
SOURCE: whats the code so the doors don't lock on a 2010
still don't understand what code u are referring to ? you can disable the auto-lock feature (if that is what you are referring to here) the instructions are in the owners manual, have you looked? they are there.
SOURCE: i DONT KNOW WHERE MY EVAP PURGE SYSTEM IS LOCATED
Yep the P0441 is : The evaporative emission control bad purge flow. You wont be able to run the component test for this issue without a good scan-tool of component tester. It may have to do with the flow control valve. It should be located next to the charcoal canister.
SOURCE: 01 dodge ram 1500 5.2 4WD code P0455 evap system leak.
This code will not stall or no start of your engine, evap only work when engine is off, it is to reduce the fume your gas tank lets out to protect the o zone, but it will not pass Emission test, also could be some thing a small as your gas cap not sealing right.
1,398 views
Usually answered in minutes!
×