At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Ok first you will have to take out that lever and remove the plastic cover to see if a. The pin on the seat broke -b.if the latch that locks the seat has broken -c. If the spring on it broke
There is something preventing the seat from latching in the upright position. Look for a piece of cloth or paper preventing the seat from becoming fully upright.
repairpal.com > Problems > Cadillac > Eldorado Cadillac Eldorado Power seat operation erratic. This is a verified problem based on 26 reports. Learn more about this problem, when it occurs and how to fix it. ... 13 model years affected: 1990, 1991, 1992, 1993, more1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 ... Come back and drivers seat will not move.
The adjusting lever for seat position is not locking into place. On the bottom of seat are runners on each side with holes in them that the adjusting lever tabs will lock in and hold seat in place. The seat slides on the runners if those tabs are raised. There is also a connecting wire or rod from the lever to the other side of seat so when lever is pulled up, tabs on both runners are raised for seat to slide. Something is keeping the tabs from locking into the holes on the runners in your car. Maybe the adjusting lever is broken somewhere, or the wire/rod came loose, or the lever is just dry and sticky and needs a shot of WD40 to loosen it up. If you can't see it and fix it with seat in place, then pull the seat back off for the repair. Good luck. Post back if my explanatiopn is not clear or you still need help.
personally i would pull the seats and weld them into a position that is comfortable both sides of the seat should be welded. a small mig welder would take care of this issue nicely and permanently ! .. jay Florida
You have to flip the lever and try to adjust the seat. Make sure that the lever is going up far enough to unlock the seat to adjust it. If it is truely stuck, it may take a little muscle to get it back into place. Caution: Do not apply too much force to the seat. It may break.
the gear broke or the bar inside is broken,take it to a body shop and have them dis -assemble the covering on the rear of the seat then you can see the problem
×