CD,AM, FM radio, How do I set the clock.....no

Depends on what audio system you have . Base , upscale etc.... You need to look on the RPO code sticker , could be in the glove box , center console , trunk , driver door jam ? RPO - regular production order .

UL0
Radio AM/FM Stereo, Seek/Scan, Auto REV Music Search Cass, Auto Tone, Clock, ETR
UM7
Radio AM/FM Stereo, Seek/Scan, Clock, ETR
UN0
Radio AM/FM Stereo, Seek/Scan, Compact Disc, Auto Tone, Clock, ETR
UN6
Radio AM/FM Stereo, Seek/Scan, Auto Rev Music Search Cass, Clock, ETR
UP0
Radio AM/FM Stereo, Seek/Scan, Auto Rev Music Search Cass, CD, Auto Tone, Clock, ETR

On factory radios and many aftermarket tuners...you need to remove all CD's, turn radio power off, find (set) or clock button generally sets face to show clock instead of radio...most use the seek and scan buttons to set hour and minutes...the owners manual also shows step by step. Hope this helps.

Free manual download here: http://www.extendedgmwarranty.com/owners-manual/chevrolet/2005-Chevrolet-Express.pdf
see page 3-40 to set the clock, and thanks for using FixYa.

owners manual

Read the owner manual

Page 20 of your owner's manual for PREMIUM AM/FM STEREO/CASSETTE/SINGLE CD:
RDS: (Radio Data System): Press RDS to access the clock mode.
Setting the clock: Press RDS until SELECT HOUR or SELECT MINS is displayed. Press SEL to increase (◄) or decrease (►). Press RDS again to disengage the clock mode.

or

Page 26 for PREMIUM IN-DASH SIX CD SOUND SYSTEM
Setting the clock: Press MENU until SELECT HOUR or SELECT MINS is displayed. Use SEL to manually increase (▲) or decrease (▼) the hours/minutes. Press MENU again to disengage clock mode.

I have attached a link that will allow you to download the owners manual for your car, and thus give you complete setting instructions.

http://www.nissanextendedwarranty.com/owners-manual/nissan_owner_manuals.html

Try this, put the key in the ignition and let it be on the first turn right marked "ACC" or you can turn off the stereo and you will notice that only the Digital Clock screen will show. Turn the Volume/Audio/Sel knob and press on the "DISP" button simultaneously for about 4 seconds then release the "DISP" button. The digital clock will start blinking, and then use the Tune/Seek arrows pointing up and down to change the time. If the hour digit is blinking change the hour and after you have changed it press "DISP" then the minute digit will start to blink change it using the arrows, when you are done press "DISP" again or leave the clock for between 4 to 8 seconds the clock will start working normally.

I hope this works for you.

Good luck!

Aquinas

im a tech at a jeep dealer and i always have trouble remembering how to set the time. but i do know that it is in the navigation menu somewhere under settings or something i hope this helps

. U can get a free owner manual @ :gm.com/gmownercenter/gmc/
I'm amazed at how many people throw out their manual--not fair to future owners! (you), there's lots of great info in it. Let me know if u have any trouble finding it. Good luck w the new vehicle.