Goto Service Center and you'll have the Latest Information.
SOURCE: engine head torque settings for 2005 nissan sentra 1.8
email me ill send you it via email cant post here too bigg!!
SOURCE: 1988 Nissan Pulsar will not engage clutch. Engine
You need to replace the clutch and pressure plate --your clutch is worn out. Plus other parts like throw-out bearing ,pilot bearing and may even need the flywheel machined flat.
You need to take it to a shop or if you are mechanicaly minded could do it your yourself,
SOURCE: how do I change a steering rack boot on a nissan
Turn the weels opposite the side you want to do, remove splitpin on tie rod end, loosen locknut half a turn, remove ball joint, remove old rubber and replace with new. Reverse whole process, and you're done. Marco 0736775896
SOURCE: i don't know what engine oil to top up my nissan
if you're in a bind anything's better than nothing. it's best to stick with a certain brand though. Decide on a 10w-30 or 15w30, and stick with it. If not sure what has been in the engine before, change the oil and filter. If switching to a synthetic, definitely change the oil and then top off with the synthetic.
426 views
Usually answered in minutes!
×