You can get help from the factory service and repair manual from the given link and fix the facing problem http://toolsnyou.com/
SOURCE: 2000 NISSAN MAXIMA TRANSMISSION SLIPPING
If you havent already try to change the transmission filter.Sometimes when the filter gets dirty fluid pressure is comprimised and certain pumps and solenoids which control shifting inside the transmission function off of the fluid pressure,
SOURCE: My 2000 Nissan Maxima, from time to time, only
identify thru computer which cylinder is the culprete then check for injector winding problems, bad grounds , have your local tech check for t.s.b. on this problem? also have you replaced the plugs?
SOURCE: i am planning to buy a nissan maxima.but the
This wouldn't make the tranny slip. It is making abs kick on when it shouldn't. there is a faulty in the system, most likely abs system causing this. It should be broughten to dealer honestly and I am a mechanic tell you this. It may be bad pump or circuit. I would pull the abs fuse that is in the fuse center under hood most likely. This will prevent abs from locking up on your or quit working on you. Until you get it repaired
SOURCE: TCS SLIP KEEPS COMING ON ON A NISSAN MAXIMA JUST
this could be a damaged sensor issue, return the vehicle where you had it serviced with your complaint.
SOURCE: service engine soon, TCS off, SLIP
The oil change wouldn't cause this problem. Just in-case, check the engine oil level.
There are many emission sensors in the car that will make the engine light come ON. Best way to find out what's going on is to have an auto-parts store hook up a engine code reader and tell you what the code means. Most auto-part store will do this for free.
Testimonial: "very helpful. i have the mechanic checked the car , the sensor says it has a malfunction in P0340"
621 views
Usually answered in minutes!
what code is the light on for?
×