At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
The speedometer on my 1991 Lumina seems OK I'm going 35 mph or less and it's cool, when it warms up and you speed up it bounces all over the place or shows around 10 mph if you're going around 55. Thanks.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Scan the vehicle for fault codes first. Sounds like you need to check the vehicle speed sensor signal into the speedometer. If that is ok then send the speedo head out for repair.
The speed senser is mounted on the transmission. This device is an slocrto magnatic motor and they cost less than $100 there held in with one bolt and have an electrical connector. Many times if it's bad enough the check engine light will come on. This problem but the heating up but work OK cild is a good chance the senser has failed.. The trans mission should be checked for overheating as the senser failure will be heal related
OVERDRIVE ENGAGEMENT IS TIED TO THE SPEED SENSOR SIGNAL, THE SYSTEM WILL NOT GO INTO OD UNTIL THE CAR REACHES A CERTAIN SPEED, IN MOST CASES AROUND 35-40 MPH, THE SPEED SENSOR SIGNAL TELLS THE ECU WHEN THE CORRECT SPEED HAS BEEN REACHED.
replaced speed senor,speedometer dial bounces at 60 mph
×