E 430 mercedes check engine light reset 1999 - 2001 Mercedes-Benz E-Class

SOURCE: engine light 1999 mercedes e320

Most likely a gas cap or emissions issue, if you are sure the car is running fine. But you will have to have it scanned to know for sure.

SOURCE: how do you reset the check engine light on a

I'm no expert, but I have had a similar problem. A friend told me to turn the key in the ignition 7 times consecutively and it will reset. I tried it and it worked bad news was it was only for about a hundred miles or a few starts. In otherwords it is not a fixall.

SOURCE: Check engine light is on due to oxygen sensors.

4...... who told you it needed all 4. You have a S500!!!!. Pay someone who is qualified to work on MB to fix it. these cars are not for DIY Backyard Bob.

Testimonial: "Thanks. I wasn't sure if it was 2 or 4. No one told me the scanner used said it was two O2 sensors."

mx5turbo92

• 545 Answers
• Posted on Dec 17, 2009

SOURCE: i need the mercedes benz 1999 clk 430 radio code

AR82.60-P-7502-01A Coding Radio
(MODEL all with CODE (750) Radio Becker Europa 2000 with CODE (751) Radio Becker Grand Prix 2000 with RDS)

1. If the radio is disconnected from the power supply, it is not operational when re-connected. After switching on the ignition and the radio, the readout CODE appears in the display.
2. The code number for the radio is advised to you on the enclosed CODE CARD.
3. To enter the first digit of the code number, you have to continue pressing station button 1 until the correct digit appears in the display. Adopt the same procedure for the second, third and fourth digits.
4. Once you have entered the correct code number with the station buttons 1, 2, 3, 4 and confirmed the entry with the SEEK button (press down), the readout CODE disappears. The radio can now be operated.
5. If you enter a wrong code three times, you must wait 15 minutes before making a new entry. In addition, if 9 incorrect entries are made, the radio will then not operate for 24 hours. During this time the radio and the ignition (terminal 15) must remain switched on.

1. If the radio is disconnected from the power supply, it cannot be operated by simply reconnecting. After switching on the ignition and the radio the word "CODE" appears in the display on the radio.
2. The code number for the radio is given on the enclosed CODE CARD.
3. Enter the code number with the station button, e.g. number 1, station button 1. After entering the first number the word "CODE" disappears and the number entered appears followed by 4 dashes. The next character to be entered flashes. After entering all five numbers, the first character starts flashing again. In this state the code number can be written over as frequently as desired. A correction can be made only by entering the complete code number again.
4. Confirm code number: Press TUNE, AUTO/SEEK or SC button. The radio automatically switches on and indicates the radio station or frequency stored with station button 1.
5. If an incorrect code number is entered and confirmed, the word "CODE" appears again on the display. If an incorrect code is entered three times the word "WAIT" appears on the display and the radio locks up for approx. 10 min. If the code is entered incorrectly three times again the radio locks up again for 10 min. Three more incorrect entries (a total of 9 incorrect attempts) increase the lock-up time to 60 min. Another three incorrect entries lock up the radio for another 60 min. The waiting time runs only when the radio is switched on.

SOURCE: radio code for a 1999 e-430 mercedes benz

Go to the dealer or call them, tell them this is my car and the radio has a code. I need to listen to the music and this car of yours is not letting me. They will give it to you or try reset it for you. Ask how much though before you do anything. They are expensive and they will not let you free easily without paying. No such free service especially from Mercedes.