How do I replace a rear upper strut mount and bearing on a 1999 Lexus RX300

SOURCE: noise front and rear struts

I had the same problem - you need to replace the strut mounds - there was a recall on the mounds for the same problem.... my noice was very very bad - and once I did that it was all over, talk about a happy person...
good luck

SOURCE: replace side marker light on lexus rx300

Remove 3 - 4 screws on fender cover close to side marker light. Pull fender cover out a bit for you to use your other hand to reach side marker light. By twisting on one direction and here you go the light out. Replace new bulb and replace everything on reverse order.

SOURCE: Do I need to replace the upper mounts when

would be a good idea but not absoluly necessary.

SOURCE: How much should a mechanic

since it is a lexus i would not advise going cheap. the struts will probably cost around $350. the motor mounts will probably run around a grand since so much work is involved.

Jeremy W.

• 5332 Answers
• Posted on Sep 04, 2012

SOURCE: 1999 Lexus RX300 left rear wheel has a rumbling noise sounds like cv joint or bearing its all wheel drive.

Spin that wheel by hand as fast as you can. If you can hear the noise coming from right behind the tire it's probably a wheel bearing.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...