At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi
Could you please quote us for item:
Recovery cylanders/tank Adapters 27.2 liter model: 63010-Eugry (grey tank) double valve connection :1/4 FL .M(7/16-20)size: 298*613 MM 15.7 KG
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
for water to get into all cylinder heads the head bolt tension is not as it should be. This comes from mainly 2 items . one is that the head is warped and is not tightening evenly and two the head stud holes are full of water and a hydraulic lock has formed before bolt tension was sufficient to hold the head down. If there is any water /oil or rust /gunk in the holes then the studs bottom out before attaining the proper head tension. Cracks can be under the exhaust valves
please rate, thx
Coolant Recovery System
NOTE: When the water thermostat (8575) is closed, there is no flow through the radiator coolant recovery reservoir (8A080).
Trapped air in the cooling system must be removed. A pressurized radiator coolant recovery reservoir system is used which continuously separates the air from the cooling system.
When the water thermostat is open, coolant flows through the small hose from the top of the radiator outlet tank to the radiator coolant recovery reservoir.
The radiator coolant recovery reservoir separates any trapped air from the coolant and replenishes the system through its radiator coolant recovery hose to the water thermostat housing.
The radiator coolant recovery reservoir serves as the location for:
service fill
coolant expansion during warm-up
system pressurization from the pressure relief cap and
air separation during operation
The radiator coolant recovery reservoir is designed to have approximately 0.5-1 liter (0.53-1.06 quarts) of air when cold to allow for coolant expansion.
unless you have a problem in the fuel system toyota fuel filters are not a reguler maintance item. there more of a life filter. there is a filter "sock" in the fuel tank
×