2001 nissan maxima gle crank no start code p1320...please help

P0132 Nissan - Engine-Codes.com

engine-codes.com/p0132_nissan.html
P0132 Nissan O2 Sensor Circuit High Bank 1 Sensor 1. ... 2002 Nissan Sentra andAltima Factory Service Bulletin OBDII Code P0132 · What does this mean?

P1320 Primary Ignition Signal Fault Testing and ... - YouTube

? 12:27
www.youtube.com/watch?v=kpFzunNeAaY
Aug 15, 2014 - Uploaded by CarsNToys This was performed on a 1997 Nissan Maxima. ... Code P1320 is indicated when ignition signal in the primary circuit (of the ... $1000 and could not find the problem out with my 2001 maxima.but now at ..... 2016 Nissan Maxima SL - Ultimate In-Depth Look - Duration: 43:16. by MikesCarInfo 261,066 views.

code p1320 refers to ignition signal--circuit malfunction===causes--wiring---ignition coil/ module---ignition system---CKP sensor---ECM IT is the same as flask code 0201
first to check is the crank sensor then the ignition module.

Here's a link to your code.

P1320 Ignition Control Signal Fault try changing crank sensor

I found a thread on Maxima.org relating to the P1320 error code. Specifically, 2000-2001 Maxima's have had this problem. It seams as though everybody agrees that the error is caused by the ignition coils. We've never had ours changed, so I'm doing that. Nissan was going to charge me approx $600 (plus tax) for parts and another $180 for labor. The job take a whole 30 minutes to replace the 6 of them, and you can get the 6 ignition coils at O'reilly's for $325. I changed three last night and the car seems to be doing better. I'll replace the other 3 tonight and see what happens.

Also, when testing the car, the car seems to "shake". I'm not sure if this is related to the P1320, but if we turn off the AC the "shaking" stops.

Hope helps (remember rated this).

P1320 is the Ignition Signal Primary. There is a technical bulletin for this code for this vehicle. To remedy this issue, you will need to replace all 6 ignition coils. I suggest that you purchase them from a Nissan dealer to make sure you get the right ones.

Distributer Signal Output is code p1320........Intake Valve Timing Control Position Sensor Bank1 is code p1140...