1987 Toyota Camry Logo

Related Topics:

A
Anonymous Posted on Mar 29, 2013

Brake light switch location on 87 toyota pickup

5 Related Answers

Dan Prochaska

  • 186 Answers
  • Posted on Jul 10, 2008

SOURCE: 1991 Toyota pickup brake indicator light

low brake fluid or float in brake master cylinder stuck

Ad

Anonymous

  • 1986 Answers
  • Posted on Aug 13, 2009

SOURCE: Toyota Corolla 4 door sedan. RE: Brake lights

the switch will be under the dash just above your brake pedal.. it's should look like a rectangle with cylindrical ends that can be pushed in and out.

Anonymous

  • 1861 Answers
  • Posted on Dec 26, 2009

SOURCE: location of the emergency rear brake switch n a

Hello. I assume that you want to know the location of the switch that activates the brake light on the dash when the park brake lever is pulled. It is under the rear of the park brake handle; you need to remove the console to see it.

However...if your brake light in your dash is staying ON, I would first suggest that you look at the level of brake fluid in the master cylinder reservoir. If it is low, the light will come on, also. The fluid level in the master cylinder drops proportionally as the brake wear. I would bet that your fluid is low; about an ounce of fluid decrease will light up the brake light.

ZJLimited

ZJ Limited

  • 17989 Answers
  • Posted on Jan 11, 2010

SOURCE: location of fuel filter 87 toyota van

1987 Toyota Truck Van 4WD 2.2L FI 4cyl
The Fuel Filter is located front seating area, center, under engine cover, passenger side of engine compartment, near firewall, mounted in fuel line.

Hope helps with this (rated this) Good luck.

Anonymous

  • 1 Answer
  • Posted on Feb 01, 2013

SOURCE: emergency brake light stays on

You probably need to change your brake pads

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1992 toyota brake light switch location?

Near where the pedal is hinged on the bracket
0helpful
1answer

Brakes locking 87 toyota 1 ton

sounds like you have rubber brake lines colasping
0helpful
1answer

Trying to replace the stop light switch on a 1986 toyota 4runner

Move into a position where you can easily see underneath the driver's side of the Ford pickup's dashboard. How you do this depends on your physical size and dexterity.
2

Shine the flashlight on the brake pedal arm to illuminate the stop light switch and the stop light switch mounting bracket. Unplug the Ford pickup's brake light wiring harness from the switch by hand.

Read more: How do I Replace the Stop Light Switch in a 1986 Ford Pickup? ' eHow.com http://www.ehow.com/how_7655525_do-switch-1986-ford-pickup.html#ixzz21tSRtoDU


Unbolt the stop light switch from the stop light switch mounting bracket using the box wrench set. Take the old switch down by hand and place the new switch on the bracket.
4

Bolt the new stop light switch to the bracket with the socket set. Plug the brake light wiring harness into the Ford pickup's new stop light switch by hand.
1helpful
1answer

I have a 87 toyota pickup that the alt. warning light and the brake warning light come on dim when the key is turned on, and stay on. When I set the park break they both turn bright. I have checked the...

The alternator is bad, this is the way foriegn car makers do things, when the alternator is bad or going bad and if it has a bad diode the dash lights will light up like the batt and brake and sometimes even other waring lights, replace the alternator and the problem will be sloved. good day,
2helpful
1answer

My brake lights dont work on my 92 toyota pick up

could be a number of things the fuse, the brake light switch u can locate the switch if u want 2 do it ur self is were the brake peddle is or a broken wire hope this helps
0helpful
1answer

Lost brake lights and cruise

have you 12 volts at the brakelight bulb holder?as with a lot of pickups the wires on the body get broke i would say a broken wire live/netural/ground good luck.adrian,,,,,,
0helpful
2answers

Location of brake switch on truck

On the brake pedal bracket. It has a push in switch to provide a contact for lighting up the brake lights
0helpful
1answer

87 celica. tail lights do not work, but brake and others do

Check the tail light failure sensor. Located in the driver's side kick panel fuse box. ~Rick89GTS
4helpful
2answers

What color is the power wire in 1994 toyota pick up

this might help
1994 Toyota Pickup Car Security Wiring Diagram
Battery Constant 12v+ Positive Wire (+): White And White/Red
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness
Starter Positive Wire (+): Black
Starter Positive Wire Location: Ignition Switch Harness
Ignition Positive Wire (+): Black/Yellow
Ignition Positive Wire Location: Ignition Switch Harness
Second Ignition Positive Wire (+): Black/Yellow Or Black/Red
Second Ignition Positive Wire Location: Ignition Switch Harness
Accessory Positive Wire (+): Blue/Red
Accessory Positive Wire Location: Ignition Switch Harness
Parking Light Negative Wire (-): Red/Black
Parking Light Negative Wire Location: At Steering Column Harness
Parking Light Positive Wire (+): Green
Parking Light Positive Wire Location: In Drivers Kick Panel
Power Door Lock Negative Wire (-): Blue/White
Power Door Lock Negative Wire Location: At Door Control Relay. The door control relay, is located behind the driver dash speaker.
Power Door Unlock Negative Wire (-): Blue/Yellow
Power Door Unlock Negative Wire Location: At Door Control Relay. The door control relay, is located behind the driver dash speaker.
Door Trigger Negative Wire (-): Black/White Or Black
Door Trigger Negative Wire Location: At 2-Pin Plug, Top Of Fusebox
Domelight Supervision Wire: Use Door Trigger, Requires Relay
Domelight Supervision Wire Location: N/A
Horn Negative Wire (-): Green/Red
Horn Negative Wire Location: At Steering Column Harness
Tachometer Wire Negative Wire (-): Black
Tachometer Wire Negative Wire Location: At Diagnostic Connector. The diagnostic connector, is located on the passenger inner fender near the fuse/relay box.
Brake Light Positive Wire (+): Green/White
Brake Light Positive Wire Location: At Switch Above Brake Pedal
Factory Alarm Disarm Wire (-): N/A
Factory Alarm Disarm Wire Location: N/A
Factory Anti-Theft System: N/A
Factory Anti-Theft System Location: N/A

Not finding what you are looking for?

265 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...