Driver door wont lock, and alarm dont set, on 2005 e-320. after closing seat belt strap in driver's door.

SOURCE: srs light come on

hi,send your car to dealer to scan the problem,maybe erase fault is require ,or you can found the exact defective part,ty

SOURCE: Constantly flashing Hazard lights

Faulthy sensor or a relay, try to reset, by dis/re-connecting the ground cable from the battery, remove the ground cable ( - not the +) wait 1 minute reconnect the ground cable.

Adeel Ahmad

• 61 Answers
• Posted on Sep 19, 2009

SOURCE: 1989 300e. The anti theft alarm went off while

This is the problem due to your anti theft alarm system. You have not mentioned which brand of anti-theft alarm system you have? Anyhow, most of the systems have a reset switch inside the kit, open the kit and on the main board, u will find the reset button, press that and hold for 5 sec, the system will be reset. Otherwise, there are 2 or 3 fuses with the wiring of kit, remove those fuses and ur engine will wake up but the anti-theft system wont work then, hope this will solve the problem

SOURCE: My s class 2004 mercedes

hi, if any doors, boot or bonnet is open it will not lock. there are SWITCHES that has to be set.for the system to recognize it is closed. please check all openings even windows. ONLY DO THIS IF.if the BATTERY HAS BEEN TAKEN OFF OR BATTERY HAS BEEN DISCONNECTED. the SYSTEM MAY NEED RESETTING. the battery NEGATIVE lead needs to be taken OFF and place the NEGATIVE LEAD ON THE TERMINAL (A NOISE WILL BE HEARD), the ALARM and CENTRAL LOCKING SHOULD BE RESET, if the ALARM DO'NT SOUND put the lead ON and OFF a FEW TIMES. CLAMP THE BATTERY LEAD CONNECTION TIGHT and press the ALARM BUTTON OFF and retry locking SYSTEM. this will work if everything is O. K. gerry

SOURCE: 1996 C-180 manual saloon, central lock is not working properly

HOW TO FIT NEW BULB TURNSIGNAL RIGHTDOOR