Power Door Locks

there are 3 ways to lock.
key metal
on door switches
and the FOB, RKE.

so is this a fob question? key fob? only failure???????
did you know that many fob modes are PROgrammable?
the operators guide tells you how to do that.
did you try both fobs, that came with car new., if not why not?
did you replace the 8 year old fob batteries, no , why not now.?

on my 08 (for example) :
can program it to only open drivers door. or all.
and autolock feature off or on.

on my other car all was worked fine. then drives door failed
to open (all 3 fobs fail, one is new) the door solenoid was bad.
$100 part. now fixed, by me.
so do all fobs fail. if in fact this is a FOB question
RKE (called remote key entry by jeep)

i have 4 fobs for my jeep now. you must have 2 good keys.
to make a 3rd by self.
so keep 2 , never ever used. to be self sufficient.
this is not a door issue, above 3 lines, its a not getting stranded issue.

This is because your master switch on the drivers door may have corroded oxidation on the contacts inside the switch and that master switch is the feed for all inside door lock switches your remote and keypad work because those electrical signals go through the driver door module you must clean all contacts on the master switch get them shiny you can use 4/0 steel wool and alcohol and also take the lock switch apart and clean the button contacts inside the switch for this use alcohol and 1000 grit sandpaper glued to a pencil and lightly spin in your fingers to shine the contacts sometimes just an eraser works but it depends on the quality of it so go with the sandpaper glued to the pencil or any circular object that will fit inside after this blow out the switch and use the alcohol to clean out and let dry

It can be issue with keyfob or door locking mechanism.

Check the help link mentioned below:---

How to test Power door locks?

http://repairhelpcenter.blogspot.in/2012/02/how-to-test-power-door-locks.html

-------------

2006 Toyota Camry: Power Door Locks Not Working?

http://whatisbyme.blogspot.in/2012/05/2006-toyota-camry-power-door-locks-not.html

------------
Door locks or windows not working on car?
http://schematicsdiagram.blogspot.com/2011/07/door-locks-or-windows-not-working-on.html

-----------

All power door locks not working on Honda Accord?
http://howtobyme.blogspot.com/2011/11/all-power-door-locks-not-working-on_14.html

---------

Repairing car Door lock Actuator?
http://howtobyme.blogspot.com/2011/11/repairing-car-door-lock-actuator.html

-----------

How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html
---------

Vehicle door panel components?
http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

------------

Power door locks not working?

http://schematicsdiagram.blogspot.com/2011/12/power-door-locks-not-working.html

---------

Door locks not working on Ford Explorer?

http://technoanswers.blogspot.com/2012/01/door-locks-not-working-on-ford-explorer.html

----------
These details will help.
Thanks.

Can be issue with the switch.
Help links are provided below for detailed procedure,Click the link below:---
Front Door dis-assembly diagram for Toyota car?

http://repairhelpcenter.blogspot.in/2012/02/front-door-dis-assembly-diagram-for.html

------
Rear Door dis-assembly diagram for Toyota car?

http://repairhelpcenter.blogspot.in/2012/02/rear-door-dis-assembly-diagram-for.html

-------
How to test Power door locks? http://repairhelpcenter.blogspot.in/2012/02/how-to-test-power-door-locks.html

----------
right side slide door light switch on Toyota Sienna? http://repairhelpcenter.blogspot.com/2012/01/details-for-replacing-right-side-slide.html

------------
Door locks not working? http://technoanswers.blogspot.com/2012/01/door-locks-not-working-on-ford-explorer.html

--------------
Power door locks not working? http://schematicsdiagram.blogspot.com/2011/12/power-door-locks-not-working.html

--------

Repairing car Door lock Actuator?
http://howtobyme.blogspot.com/2011/11/repairing-car-door-lock-actuator.html

How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

Vehicle door panel components?
http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

----------
This will help.
Thanks.

I have the same problem I can unlock my toyota 99 4 runner but does not lock on inside switches or remote.

just found out about it today.

dealer only

Yes, insure that you have power to the trunk lock inside trunk, If not could be lose/broken wire or shot fuse. I am sure the key fob does work for the doors? If not have key fob battery replaced. Also, a quick check on power to trunk lock, check to see if have remote power button inside car, if it works power is good. Defective key fob would then be indicated.

no.. u need to have a dealer do it.. they also have a tool ti check it the remote is transmitting a signal as well

Program your factory keyless entry functions
For 2001+ Tacomas equipped with a factory alarm or keyless entry, here are some programming options that allow you to adjust the way your locks work.
The first programming option allows you to set the entry unlock to: (A) unlock the driver door with one push, and the remaining doors with a second push OR (B) unlock all of the doors with a single push.

• Open the driver's door. Remove the key from the ignition switch.
  
• (Complete these steps within 40 seconds)
  
  1. Insert the key into and remove it from the ignition switch 2 times.
     (IN - OUT - IN - OUT)
     
  2. Close, then open the driver's door 2 times.
     (SHUT - OPEN - SHUT - OPEN)
     
  3. Insert the key into and remove it from the ignition switch 1 time.
     (IN - OUT)
     
  4. Close, then open the driver's door 2 times.
     (SHUT - OPEN - SHUT - OPEN)
     
  5. Insert the key into the ignition switch and leave it in.
     
  6. Close the driver's door.
     
  7. Turn the key from LOCK to ON 4 times, ending at LOCK
     (LOCK - ON - LOCK - ON - LOCK - ON - LOCK - ON - LOCK)
     
  8. Wait for the locks to stop, then remove the key from the ignition switch.
     
• On the key fob, press and release both LOCK and UNLOCK buttons at the same time.
  
  1. [For all doors unlock] press and release the UNLOCK button.
     
  2. [For driver door unlock] press and release the LOCK button.
     
• Open the driver's door. The programming is complete. If programming did not occur, start over.