When i turn the key sometimes it doesnt want to start until the second or third time what can i do to fix it
SOURCE: having problems starting a 97 GMC Sierra
sound like the timming is off i would check it first then have the starter checked that might be your noise
SOURCE: 1997 GMC Sierra Truck Ignition Switch
its a long process,you need a steering wheel puller, once its off take the hazard button assembly out, take the turn signal loose, pull old ignition out, carefully install new one, and reverse procedure and always if u get confused i would highly recomend
a chiltons manual they explain things great
SOURCE: 1997 GMC Sierra Ignition Switch Replacement
take off the cover on the top and bottom of the steering column just behind the wheel. pop the tilt lever out simply just by grabbing it and give it a good tug. then once you have the new switch and you get in there your going to need an inverted torx socket to remove the small bolts that hold the switch to the column. do not move the gear on the new switch make sure it lines up exactly as the old one did!!!!!!!!!!!!
SOURCE: 2005 gmc sierra 2500hd heated seat turns off
you have a couple of problems first of all your drivers sd=ide heated heat pad is probably faulty, for your heating problem you may have to get the hvac doors recalibrated.
310 views
Usually answered in minutes!
×