The existing resistor pack was made by ITT Automotive. The resistor has a pigtail that plugs into the connector inside the right front fender. When I go to the parts store they show me a resistor RU1027 that doesn't have the pigtail and also has a 4 prong connector that is 1/2 larger than the plug available on the harness. What are my options. The existing resistor was used on the 1998 - 2001 Olds Bravada, Chevy Blazer also.
There are two versions of the1998 production model, and certain parts can be incorrectly spec'ed by aftermarket manufacturers (I have run into this several times). The obvious solution is use the GM OEM part which can be identified by the truck VIN.
SOURCE: Blower motor works intermittenly & I smell burning wires
you need to replace motor itself im sure on this you can find a used one on car-part.com i should have one [email protected]
SOURCE: 7 wire harness going to blower motor resistor
There is an updated resistor/connector package. Very expensive from GM, try your local NAPA or other parts supplier for a replacement
SOURCE: how does a resistor look like on a 2001 gmc jimmy
The blower resister on this model is mounted with two screws very near the blower motor.When it is unmounted,and pulled out of the blower box,it looks like a heat sink/plastic/alluminum .This part is cooled by the blower motor,and supplies the speeds for the fan that you select with the fan speed switch.If I caan help,let me know.>>[email protected]
SOURCE: 1998 gmc sierra blower motor runs Intermittently
does anyone know what the problem is???? 1998 GMC Sierra blower motor problem.... when fan is turned on it works fine then all of a sudden it makes a loud screeching noise and sounds like its gonna blow up, does it on all speeds. please help
SOURCE: Title: Chilton's repair manual. Chevy S-10
Chilton manauls are extremaly general If you want a factory manaul www.helminc.com they print most manauls for every body at much less the the dealer prices
120 views
Usually answered in minutes!
×