SOURCE: 2003 Toyota Camry - Both Brake lights not working
Lok in the trunk on the left side, behind the carpet for a small plastic box with a bunch of wires going to it. Look to see if there is brake light powe coming in with the pedal depressed. If so, and no power is coming out, you need to order and replace the "taillamp failure sensor".
SOURCE: 1997 TOYOTA CAMRY BRAKE PROBLEMS
Check the trunk wire harness right by the left side trunk lid hinge for broken wires. This is a common problem on these cars. If the wires are broken you will have to repair them. The best way is to add short lengths of wires to the breaks and solder them back together. Use electrical tape to recover the harness.
SOURCE: How to change a third brake light bulb for 1993 Toyota Camry?
open the trunk and look up along the top of the bumper and you should see two screws / nuts that secure the light assembly.
SOURCE: 1989 Toyota Camry. No brake lights.
It could be the relay, which is a yellow box located under the carpeting in the trunk on the left side. It is a problem common to your model. Also, check the brake switch's (behind the brake pedal) functionality (12V present with key at ACC or ON and continuity between wires when button engaged).
i hope this helps
-matthew
Testimonial: "Wow! I would have never found the problem without you guys. It was the relay located in the trunk. Thanks!"
244 views
Usually answered in minutes!
Thxs for the trouble shooting . It works!
I stated on the left side in the wiring harness an their was a short. Thxs a million! FIXYA! KEEP DOING GREAT THING, AND AGAIN THXS FOR HELPING A "SOLDIER"
×