SOURCE: Heater fan on a 1988 cadillac fleetwood deluxe
passenger side under the dash... tho there is a chance it's mounted on the passenger side inside the engine compartment
SOURCE: how can i get to
BROUGHAM 1. Disconnect electric-al connectors at blower motor,
compressor cycling switch, power module and radio lead-in connections. 2. Remove righthand windshield washer nozzle. 3. Remove righthand secondary air inlet screen from plenum. 4. Partially remove rubber molding above plenum. 5. Remove remaining screws and the primary inlet screen. 6. Remove blower motor. 7. Remove two screws securing compressor cycling switch to
module and position switch out of way. 8. Remove AC module cover attaching screws and the cover. 9. Disconnect heater hoses at heater core. 10. Remove screw and retainer holding heater core to frame
top. 11. With temperature door in max. hot position, reach
through temperature housing and push lower forward comer of heater core away from housing,
then rotate core parallel to housing. 12. Remove heater core. 13. Reverse procedure to install.
SOURCE: trying to replace the heater core on a 92 cadillac
For heater core replacing procedure. I suggest you to go through
this related help links.Its all complete step by step procedure: ----How to replace heater core for All car models? Click the link below: --- http://technoanswers.blogspot.com/2011/11/how-to-replace-heater-core-for-all-car.html -------------- http://schematicsdiagram.blogspot.com/2011/12/how-to-flush-heater-core.html --------------- http://howtobyme.blogspot.com/2011/12/how-to-remove-heater-core-on-2008-honda.html http://howtobyme.blogspot.com/2011/12/honda-heater-core-replacement.html ------------ How to replace heater core?http://technoanswers.blogspot.in/2012/02/how-to-replace-heater-core-on_10.html
How to Flush Heater Core?
How to Remove Heater Core ?
Heater Core Replacement?
To replace heater core?http://technoanswers.blogspot.in/2012/02/how-to-replace-heater-core-on.html------
----------This will help.Thanks.
BROUGHAM
1. Disconnect electric-al connectors at blower motor,
compressor cycling switch, power
module and radio lead-in connections.
2. Remove righthand windshield washer nozzle.
3. Remove righthand secondary air inlet screen from plenum.
4. Partially remove rubber molding above plenum.
5. Remove remaining screws and the primary inlet screen.
6. Remove blower motor.
7. Remove two screws securing compressor cycling switch to
module and position
switch out of way.
8. Remove AC module cover attaching screws and the cover.
9. Disconnect heater hoses at heater core.
10. Remove screw and retainer holding heater core to frame
top.
11. With temperature door in max. hot position, reach
through temperature housing and
push lower forward comer of heater core away from housing,
then rotate core
parallel to housing.
12. Remove heater core.
13. Reverse procedure to install.
239 views
Usually answered in minutes!
×