SOURCE: 2000 Honda Accord's Timing Belt and Water Pump
sounds like your timing belt is a little to tight and the vibration from the belt is the humming you here
loosen the belt but you may want to call the dealer for the spics on tightness of the belt . thx
SOURCE: serpentine belt
This is a picture i drew in paint , for the 2001 honda passport belt wrap with a 3.2Liter V6, picture worth a thousand words.
SOURCE: How to get the timing belt off a 97 Honda Passport?
Ok this is pretty simple first of all this vehicle has a hydraulic tensioner so will nee to loose the two bolts that holds the hyraulic tenisor and remove tensioner completely and belt will become loose and can be removed. Its recommended that you change this tensioner when you do a timing belt job at about 60,00 miles. However if you choose to re-use tension it can be compressed(pushed back in with a bench vise and can be held in place for installion by a very skinny allen key of a wire type brake clip or something of that sort. Here is a diagram of your timing marks, conatct if you need more help Good Luck and thanks for using
FIX YA
http://www.2carpros.com/car_repair_information/tec_info/1997/honda/passport/1997_honda_passport_timing_belt_diagram_marks.htm
SOURCE: how does one remove the belt tensioner off a 2001 honda passport?
14 or 15mm socket to release tension. Use socket with leverage bar push/pull towards driver side. Will notice tension releasing, pull belt. Use 5/16 allen wrench for bolt in center, 12 mm socket for mounting bolt. Remove bolts, remove tensioner.
SOURCE: need Serpentine Belt Diagrams for 2001 honda
you can access most items @autozone.com, they have free manuals online. you will need to register and provide info about your car, it is FREE! what I pulled up is courtesy of autozone.com, this is for the 01 passport 3.2 2wd vehicle. the manuals will provide step by step instructions you can print off, good luck!
76 views
Usually answered in minutes!
×