At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Go on your computer in your browser and type in '1990 Honda Accord 2.2 4 cylinder head bolts torque specifications'. You will get back the engine bolt layout with the bolts numbered with the torque specs. You tighten the bolts according to the numbers of the bolts in the order starting with number 1 and working to the highest number.
Tighten the cylinder head bolts. Tighten the cylinder head bolts is sequence to 29 Nm (3.0 kgf-m, 22 ft. lbs.). Use a beam-type torque wrench. When using a preset type torque wrench, be sure to tighten slowly and do not overtighten. If a bolt makes any noise while you are torquing it, loosen the bolt and retighten it. Make sure the threads are clean, new heads bolts are best.
i just pull them up with a rachet and one grunt ,they are only 13mm headed bolts so around 35 but i never use a torque wrench to be honest ,not even for head bolts on my beloved jag .
Tighten the cylinder head bolts to their final torque
specification in two steps. Use a crisscross sequence starting with the
bolts at the middle of the head and working toward the outer bolts.
Step 1: Tighten each bolt to 22 ft. lbs. (30 Nm).
Step 2: Tighten each bolt to 61 ft. lbs. (85 Nm).
Fig. Cylinder head bolt loosening sequence - 1.6L (B16A2) engines (click image for zoom)
the main bearings bolts is to 1st step 30Nm or 22lbs ft and the last step is 75Nm or 54lbs ft in this tighten secuence. 9 3 1 5 7 on the top bolts and........ ........ ........ ... 8 6 2 4 10 botton bolts and the connecting rod 45Nm or 34 lbs ft i hope be help you
×