Top 20
1997 Hyundai Elantra - Page 9 Questions & Answers
Thermostat in a 1997 hyundai elantra
See exploded view
REMOVAL
1.
Drain the coolant down to thermostat level or below.
2.
Remove the coolant outlet fitting and gasket.
3.
Remove the thermostat
Water pump
1.
Drain the coolant and disconnect the coolant outlet pipe connection hose from the coolant pump.
2.
Remove the drive belt and engine coolant pump pulley.
3.
Remove the timing belt covers and the timing belt idler.
4.
Remove the coolant pump mounting bolts, then remove the generator brace.
5.
Remove the coolant pump assembly from the cylinder block.
See an exploded view:
HYUNDIA 1997 ELENTRA 1.8
http://www.2carpros.com/how_to/transmission_service_4.htm
Popular Problems Checks
1. Car will not go into gear:
- Gear selector cable has failed
- Brake lock solenoid has failed not allowing the gear selector to move out of "Park"
- Excessively low transmission fluid (note: if car is operated for an extended amount of time with low fluid level the transmission will fail prematurely)
- Shorted electrical component not allowing the PCM to control the transmission. Example: shorted fuse
- Flex plate (flywheel) is broken completely not transferring engine power to the transmission.
2. Car goes into gear but then fades out of gear or is slipping while driving:
- Transmission fluid is low
- Transmission clutch discs or bands are worn out or burned
- Faulty transmission shift solenoid.
3. Car goes into gear but does not shift out of first:
- Blown fuse to the PCM controller
- Faulty vehicle speed sensor (VSS)
- Shorted second gear control solenoid
- Faulty transmission controller (PCM)
Tips About Common Problems and Fixes
1996 Elantra 1.6GLS- J2 switching off
I think idle speed control actuator must also be checked.
If you are not familiar with such repairs better take it to an authorized service shop.
1.
fuel pump revoval
Remove the rear seat cushion.
2.
To reduce the internal pressure of the fuel lines and hoses, first start the engine and then disconnect the electrical fuel pump connector.
Be sure to reduce the fuel pressure before disconnecting the fuel main pipe and hose otherwise fuel will spill out.
3.
Disconnect the battery cable from the negative terminal of the battery.
4.
Remove the high pressure hose and fuel return hose.
5.
Remove the fuel pump assembly.
What's does it mean when your P,R,N and D gears are blinking?
This usually indicates a problem with the transmission control module (TCM). You should have a qualified mechanic inspect and diagnose the problem, as it could be something as minor as a faulty TCM or something more serious such as a transmission failure. Replacement of the TCM or other components may be necessary to fix the issue.
All torque specs for 2012 hyundai elantra gls
a car.all cars made have service manual. every one.and all that is covered even a 3 inch think book.why not buy one from maker.or tell what country you are in .cars are not the same at all , in all countriessome have 5 or more engines choices and transmissions.check out Europe to learn that.nor did you say what is to be worked on, to torque.buy the book or if in USA read it here, at mitchell1 DIY online
https://eautorepair.net/Marketing/Default.aspbuy the book at the dealerpay on line or google all week long.
Dashboard lights/A C Display/BluetoothRadioPhone Monitor
some cars the dash has autodimmer
a sun sensor on the dash
some can be disabled , so read the users guide
to do that.
most cars, we can disable the out dim
in the free users guide, search word DIM.
bingo,? see on,off ,up ,down or auto?>
find the top of dash sun sensor
shine a very bright light there, and dash DIM goes full bright, if yes, bingo
see the users guide in the glove box yet
page 5-42 is your answer
see the words obstructs either sensor
bingo
it is in your manual this.
https://www.carmanualsonline.info/hyundai-elantra-2022-owners-manual/?srch=dim
Not finding what you are looking for?