20 Most Recent 1996 Land Rover Range Rover - Page 8 Questions & Answers

0helpful
2answers

Car not starting

Yes without the cam signal it doesn't know just when to fire the respective spark plugs
9/13/2009 7:00:48 PM • 1996 Land Rover... • Answered on Sep 13, 2009
0helpful
2answers

My range rover will not start at all help!!!!

Most common problem if the car wont start is that its an electrical problem.Sir I think you'll have to check the ignition switch , the battery , the wires ,the fuses,the coils, the spark plug and don't forget the sensor.Because of there might be a short circuit that have happen to your vehicle .If it will start then it will stop that can be non electrical problem.If you have the equipment to use then its good for you'll save money, but if you don't have equipment then better go to a car mechanic to be sure. To troubleshoot is what there going to do.
8/8/2009 3:20:13 PM • 1996 Land Rover... • Answered on Aug 08, 2009
0helpful
2answers

I have a rover 200 1986. there is a light on the

brb or srs... srs is your airbags (seconday restraint system)
8/4/2009 10:44:07 PM • 1996 Land Rover... • Answered on Aug 04, 2009
0helpful
1answer

Gearbox fault, gear stock in manual mode will not

so does my exwife but,Iwould look at your idle control valve
7/31/2009 6:53:47 PM • 1996 Land Rover... • Answered on Jul 31, 2009
0helpful
1answer

Have to get fuel out of my diesel range rover is

either syphon fuel ot or remoove fuel tank and drain that way
6/9/2009 8:20:45 PM • 1996 Land Rover... • Answered on Jun 09, 2009
0helpful
4answers

1996 4.0 Range Rover won't unlock

This car is in super lock mode... when you press remote 2times to lock or when you lock with remote and try to unlock using key manually.

there is a 4 digit number to open the door, its like opening a safe, starting from the left(key in car door) it goes L/R/L/R. so if number code is 1234..... left 1, right 2, left 3, right 4.

or if this too troublesome you can ask landrover dealer to remove the KEYCODE.

happy trying.....
adrian/kk.
5/31/2009 10:43:00 PM • 1996 Land Rover... • Answered on May 31, 2009
0helpful
1answer

Ignition coil burns out on Range Rover P38 efi

make sure you disconect the battery or the computer still reads that the circuit is open and will fry a perfectly good coil. I had the same issue and had to do a second time. Disconected the battery and now no problems.
5/25/2009 7:12:07 PM • 1996 Land Rover... • Answered on May 25, 2009
0helpful
1answer

Changed heads due h/gasket ,tried to start engine

Hello; Sounds like firing order is incorrect. Recheck plug wires for proper cylinder match. The firing order is usually casted on the intake manifold.. Let me know, ok?
Six cylinders :153624
v-8 18436572,- 1546278 etc.
4 cyl -1342
GOOD LUCK
5/6/2009 8:57:16 PM • 1996 Land Rover... • Answered on May 06, 2009
0helpful
1answer

Rear door open LR

Not 100% sure on your particular vehicle but there should be a push in style button of some kind that the door presses against when closed. Look for such a thing on the door frame area where door makes contact when closed. If it's faulty, could cause it. It may be as simple as adjusting your door striker in slightly to eliminate or lessen movement of the door.
4/15/2009 11:46:58 PM • 1996 Land Rover... • Answered on Apr 15, 2009
0helpful
1answer

My husband has a landrover freelander, cant lock the car

first thing i would be checking is the door switches on each door if are broken or by removing switches to see if connection is broken or badly corroded also check bonnet & tailgate switches for same problem.
3/12/2009 6:36:20 PM • 1996 Land Rover... • Answered on Mar 12, 2009
0helpful
1answer

Overheating after about 20 mins running

I've had the same problem, twice!

The solution is 2 fold:
1. Replace the filler cap on the overflow bottle, the genuine RR part works best;
2. Replace the 'O' Rings on the heater matrix under the dash. This last is quite a fiddly job, go to www.rangerovers.net for full details on how to do it. If you take the vehicle to a RR dealer they want to charge huge amounts of money because they replace the entire heater box not just the 'O' rings.

Good luck

thcs
2/22/2009 8:13:32 AM • 1996 Land Rover... • Answered on Feb 22, 2009
0helpful
1answer

Have a 1996 rangerover will start but when placed in gear wont

check the fuse box under the seat.....i forget with fuse it is but if its missing or blown......the truck will not move...happen to m e

2/18/2009 10:07:37 PM • 1996 Land Rover... • Answered on Feb 18, 2009
0helpful
3answers

Intermitant Starting Fault P38A Range Rover

hello andy,

i think you already solved the problem..... whack the fusebox..

you need to chage the fusebox, because overtime the base of the fuebox which is made of plastic cracks and is causing short circuit.
1/17/2009 2:49:44 AM • 1996 Land Rover... • Answered on Jan 17, 2009
0helpful
1answer

Range Rover p38 bmw 2.5 injection running problem

Hello,
It turned out to be a broken wire on the injector which was causing a bad connection,now running better than before.
The cold was just a coincidence.

Thank you and best regards,Yvonne
1/8/2009 7:18:59 PM • 1996 Land Rover... • Answered on Jan 08, 2009
0helpful
2answers

My drivers window will not go up

you will have to replace the power window motor. but first have you checked the fuses and the motor relays?

tom
1/7/2009 9:34:53 PM • 1996 Land Rover... • Answered on Jan 07, 2009
Not finding what you are looking for?
1996 Land Rover Range Rover Logo

269 questions posted

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Range Rover Land Rover

  • Range Rover Land Rover

Most Popular Question

1996 4 0 se rangerover start boggs

  • Cars & Trucks
Loading...