20 Most Recent 1999 Chevrolet Venture - Page 3 Questions & Answers

More than likely one of the *RODS* that connect the door handle to the door catch (LOCK) has came loose or broke. If this is the case the doorpanel will need to be removed to examine the door open and closing mechanism "In Action" to determine the problem. I hope this helps!

Go to auto parts store O'reillys auto part has a tester free! If you are not close to a O'reillys call you local auto parts stores. You may just need to replace the battery!

replace your tmc or get it reprogramed

It could be either a failed head gasket or inlet manifold gasket which is allowing coolant to leak into the oil passageways

It is mounted underneath of the chassis

Open the back door, remove the little round plastic cap in the interior above the rear bumper, then use your tool to turn the nut counter-clockwise to lower the spare tire.

shift cable adjusment

A lot of the parts can be used. Not all though, when it comes to engines and transmission.

The ignition module is under the coils. I assume you have a 3.1L engine, or a 3.4L. In any case, the coils are mounted onto the ignition module.

yes now next problem 2004 isuzu rodeo 3.5l direct injection p1239 p1246 code