20 Most Recent 1999 Chevrolet Venture - Page 5 Questions & Answers

Open the bottom of the fuse / relay box, look for burnt/ damaged wiring under where the fan relays mount.

no I am not there.. you need to put gas in.. charge the battery and try to start the car..after it charges a few hours..

pump is in the gas tank. you have to remove the tank, there is a lock ring holding the sending unit. turn it counter clockwise with a hammer and screwdriver.

check cooling fan sensor

check belt alignment and tension, replace tensioner pulley or belt.

stop at a garage and have a couple of strong men help you-cheers Denny-p s they probably do it for next to nothing or cheap

is it just the brake lights or the tail lights when the headlights are on? the tail lights may have a double filament bulb one lights up when brake is applied and the other filament is for just tail lihts so check the bulbs carefully and if you see one filament is broken replace the bulb. also make sure the socket where the bulb seats is not corroded or dirty

u need a haynes manual sold at a part store---------the issue cud also be a module or relay

trying to unhook the battery for 24 hours should work then

Connect the new battery, turn the ignition key to On or Accessory, and the wipers should return to their "home" position.

you may have to put on lift or jack it up to get to plugs.

Was the trans having problems & that is why you changed the fluidIf so your done,it is slippingOtherwise you need to look up the fill & check procedure

mines ok ,check the computer or the internet connection

your switch could be faulty or bridged try changing the switch