20 Most Recent 2008 Land Rover Range Rover Sport Questions & Answers

Question edited for clarity. Question moved to model category Check fuses first. Videos here https://www.google.com/search?q=2008+Range+Rover+HSE.+Where+is+front+door+control+module+located ..

HDC relies on the data from the ABS sensors also, so you should check the ABS sensor cables and that the sensors have not been disturbed (the cables run close to the brake wear sensors). I would bet that they have either disturbed or disconnected the ABS sensor or damaged the cable. It could also be a possibility that they disconnected the sensor, ran the vehicle then realized that it was disconnected, but the fault was triggered, and it may be a case of just having to reset the ABS or HDC system to clear the fault. To reset this fault requires Testbook/T4 or a non-oem software/hardware.

If it were the prop, you have vibration at high speeds/out of balance. Look at the back of both wheels. If one has oil around where the rearend meets the backing plate, bad axle bearings.

why is it on? Is anyone sitting in the seat? If it is coming on itself while you are driving, something is wrong with the system and it must be looked at by a certified dealer. I need more information

there should be a belt routing diagram on a decal under the hood somewhere that shows this.

If it were mine, I wouldn't drive it until I knew it was reliable, Gina. Can you rent ("hire", if you use that word) another vehicle for that trip?

check the condition and tension of the drive belt. Have the alternator out put checked . Check that the rectifier pack is operational as 14.5 ac will not charge a battery