2008 Ford Escape Hybrid - Answered Questions & Fixed issues
My 2008 Ford Escape has
Check the relays and fuses in the Power Distribution box under the hood. If all are good check the Alarm circuit ignition kill switch. If you didn't get the Alarm built into the vehicle but had it installed after you bought it remove the fuse from the Alarm power line to disable the kill switch. I did have this problem once and it turned out to be the battery on mine, a 2005 with Alarm built in. Unless you have the Hybrid version you could get in 2008 the vehicles are basically the same.
2008 ford escape hybrid idle too high
If you do not have a check engine light on you may have an issue with the electronic throttle control system, repair requires the system be scanned to see why it is idling to high. If you do have a check engine light on have the system tested for fault codes.
Howyouchangeserpentinebelton2008escape
Release the pressure on it with a 3/8 ratchet or 3/8 pry bar. Slip old one off, put new one one. Follow the diagram that is in the car. 10-15 minute job at most. Level Easy.
An orange wrench symbol has
Doing some checking this is an issue with the HV battery and its normal operating temperature range where the temperature range is exceeded or an issue with the HVBT climate control system having a failure. You will need to take this to the dealer and have them run codes and to look at the temperature blend door actuator as well.
Airbag light always on
your pretensionor in your passenger seat belt has gone bad disconnect the electrical connector and clean it first with electrical spray cleaner in case its not makeing a good contact. if that does not turn off light replace your seatbelt .you will find a reasonable price on ebay or a used a your local junk yard. for a few more dollars visit your ford dealer.if this was helpful please leave me good feedback
Abs light and brake light on
In a normal car, this would be a brake defect. A pad or a rev counter is not in its proper place, is broken, or blocked by debris. It still may be true, but with regenerative Braking you get into some areas that most Mechanics need to train for.Your car is 4years old, and probably ready for its first set of Brakes. There may be extra hardware in the way for the Hybrid models. It is possible that a Repair CD in Autozone or Advance autoparts can teach you and show you how to work on these specialized models. Otherwise go to someone use to working on this breed of car.
How do I reset a 2008 Ford Escape Hybrid after a crash?
Hey Guy, We have a good number of questions to answer and yours has just come up! I'm happy you've found your answer but instead of criticising us why don't you do something useful and share what you've learned. That is what FixYa is all about! John
How do I put the escape hybrid in fuel only mode
no such thing ,pull the plug off the coil pack ,why the fuel problem has someone put diesel in or something ,these fuel filters last the life of the vehicle unless someone has put sugar in the tank
I had a hole patched in the gas tank of a 2008
When the engine light is on you have a problem detected by the computer on your vehicle which could be related to the fuel gauge not reading correctly or not at all. You can go to the local parts store and they will read your codes generally for free. You can post the codes they read on here and we can try and help you out. Did they take your fuel tank out from under the vehicle to repair it? If so they may not have hooked up the connector on top of the fuel tank so the sender will work. Did it work at all after they did the work?
var fctb_tool=null;
function FCTB_Init_afc0274c10a74ee6baea7ce7c5283487(t)
{
fctb_tool=t;
start(fctb_tool);
}
Lost key. No spare
take your title or insurance card to your closest dealer, although i'm sure that it needs to be programmed to your car, so you would have to have the car towed to the dealer....sorry, i think i would start looking VERY hard for those keys lol good luck
Not finding what you are looking for?