If you have a multimeter you can OHM out your coil. You can call or e-mail Artic Cat for OHM specifications. If your coil ohm's out good.. check your Alternator for power output.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
KymcoForum.comhttps://www.kymcoforum.com > ...
Jan 10, 2015 - Try un-plugging the rectifier, and see if you get spark. It may be shorting the stator to ground. Also try clipping the black, and yellow ...
The 3000 mule I have worked on has a coil, wire which screws into the coil and spark plug boot.
Do you have power and ground connection at coil.
You said you replaced coil did the wire and spark plug boot get replaced also.
If there is any question about the connection between the coil, wire and boot you might try removing the coil, wire and boot from back cylinder and placing on front. Swap them and see if you loose spark on rear plug after swapping.
Just a thought.
An immobiliser is a common feature of modern cars and bikes and if it is a feature of your machine, if it isn't working correctly it is likely to prevent power reaching the coil.
I suggest you read your handbook before you go further.
×