Well versed in most aspects of sound engineering
Megasong posted an answer for this Chauvet Music:
"Have you got a terminator on the far end? If not this is probably the problem."
Megasong posted an answer for this Mackie Music:
"These must be one of the most fault prone speakers ever made. Disconnect the power supply..."
Megasong posted an answer for this Mackie 1604 Vlz3 16 Channel Mixer:
"Totally depends on the sub and if it has a crossover and if so what sort and if it has a..."
Megasong posted an answer for this Mackie Music:
"ALL the lights? Major fault, suspect not really ALL. please detail which."
Megasong posted an answer for this Mackie Music:
"Take the main outputs into a stereo input (or a pair of mono inputs) on the Peavey -..."
Megasong posted an answer for this Behringer Europower Pmp5000 Powered Mixer Pmp5000:
"Chances are you've blown the output transistors. Speakon connectors cannot short out but..."
Megasong posted an answer for this Behringer Pmp3000 16 Channel Audio Mixer:
"You don't say which QSC Amp. Assuming it is one that can only drive down to 4 ohms you..."
Megasong posted an answer for this Mackie Music:
"Why on earth would you want to fix a new item that does not work. Take it back."
Megasong posted an answer for this Behringer Music:
"On what channels from what source? Is it from USB too? have you got the gains set right?..."
Megasong posted an answer for this Mackie 1604 Vlz3 16 Channel Mixer:
"Simplest is to use the LR button at the bottom of the channel strips you want to send to..."
Megasong posted an answer for this Behringer Music:
"I presume you are using the send and return inputs on the EFX500. Make sure the effect..."
Megasong posted an answer for this Behringer XENyX 1204 XENyX 1204 12 Channel Audio Mixer:
"If you use the Behringer ASIO drivers (available from their web site) it will connect just..."
Megasong posted an answer for this Behringer Music:
"A bit more info about what you're you;re trying to do would be useful. You would normally..."
Megasong posted an answer for this Mackie 1604 Vlz3 16 Channel Mixer:
"Take the mono output from the desk to the powered subwoofer, it should have it's own..."
Megasong posted an answer for this Behringer XENyX 1204 XENyX 1204 12 Channel Audio Mixer:
"Not sure what your issue is, as long as you have the ASIO drivers installed you'll be able..."
Megasong posted an answer for this Behringer Music:
"This is going to be a nightmare. The only way will be in a daisychain with the crossover..."
Megasong posted an answer for this Mackie Hotwire VT12 Tube Guitar Combo Amplifier:
"https://supportloudtech.netx.net/loud-public/#/search/basic/vt12"
Megasong posted an answer for this Mackie Hotwire VT12 Tube Guitar Combo Amplifier:
"They are available on the Mackie drivers site at..."
Megasong posted an answer for this Samsung Home Security:
"Always use a HDD rated for continuous use such as the WD purple range. Do NOT use a..."
Megasong posted an answer for this Dyson Bagless Upright Vacuum DC41 Animal:
"The DC41 does NOT have a belt. It is motor driven."
Megasong posted an answer for this Mackie SRM 1801:
"These subs are renowned for problems. The PSU and the output stages as well as the main..."
Megasong posted an answer for this Peavey XR 1220 Powered Mixer Mixer Powered:
"You have two monitor outputs, each controlled by a fader. Plug the amp(s) you will be..."
Megasong posted an answer for this Peavey XR 1220 Powered Mixer Mixer Powered:
"What Tascam recorder are you using? If you are multitracking you will be unlikely to be..."
Megasong posted an answer for this Mackie Music:
"Are you actually sending a signal to the effects unit? normally you would have it in an..."
Megasong posted an answer for this Mackie Music:
"Why are you not using the inserts? Either assign a sub channel to your effects unit or do..."
Megasong posted an answer for this Mackie ProFX8 Professional Compact Mixer:
"Sounds as if you're not sending a signal to the effects unit or it is not sending it's..."
Megasong posted an answer for this Mackie Onyx Blackbird Premium 16x16 FireWire Recording Interface:
"Yes, get some TRS to XLR (Male) cables or adapters and plug them into either the monitor..."
Megasong posted an answer for this Mackie cfx20 mkII compact mixer:
"Please post some more detail of how each channel is set up and what you have assigned..."
Megasong posted an answer for this Mackie SRM450 PA Speaker:
"Probably the internal fuse or the amp blown. If these are the MK1 they are notoriously..."