Professional Seamstress/Tailor
sewinsnap posted an answer for this Husqvarna Viking 1:
"When you use twin needles you have to put thread in two different slots in the tension..."
sewinsnap posted an answer for this Husqvarna Viking 1:
"More than likely you are trying to see through something too thick. That's when you get..."
sewinsnap posted an answer for this Husqvarna Huskylock Computerized 910:
"I believe the thread is not seated correctly in the tension discs, place one hand in front..."
sewinsnap posted an answer for this Singer 20U109 Straight Stitch and Zig Zag Industrial Sewing Machine:
"You can't do that yourself, you have to take to a dealer for that."
sewinsnap posted an answer for this Sewing Machines:
"Change your needle and take bobbin out to see if you have a thread jam."
sewinsnap posted an answer for this Husqvarna Viking 1:
"Check these things, bobbin in properly, upper thread seated in tension disc right, and..."
sewinsnap posted an answer for this Husqvarna Sewing Machines:
"I suspect that you have your feed dogs lowered and/or you have the setting wrong for..."
sewinsnap posted an answer for this Sewing Machines:
"Could bee a few things, need a size 14/16 in needles. LONG stitch length. Also make sure..."
sewinsnap posted an answer for this Sewing Machines:
"Make sure you put the needle in properly then unpluf the machine for a minute to clear..."
sewinsnap posted a question about Bosch Dishwashers:
"Model SHE3ARLxCU I've tired everything the book says to try. Still have flimy glasses."
sewinsnap posted a question about Cars & Trucks:
"I think it has something to do with taking that module box off"
sewinsnap posted an answer for this Husqvarna Huskylock Computerized 936:
"My Huskylock 936 - needle won't go down. The motor seems to be binding up."
sewinsnap posted an answer for this Husqvarna Huskylock Computerized 936:
"Check your threading, both top and bottom, sounds like you have threaded wrong."
sewinsnap posted an answer for this Husqvarna Huskylock Computerized 936:
"I cannot get the needles to stay in my Huskvarna Huskylock 936 serger. How can I get them..."
sewinsnap posted an answer for this Husqvarna Huskylock Computerized 936:
"I would say it is 2 things, first you don't have the screws loosened enough to get the..."
sewinsnap posted an answer for this Husqvarna Huskylock Computerized 936:
"What are you trying to do? It will say overloaded usually if the fabric is too think that..."
sewinsnap posted an answer for this Husqvarna Huskylock Computerized 936:
"husqvarna 936 overlockmachine, says overloaded and wont sew. what can I dotoget it..."
sewinsnap posted an answer for this Husqvarna Huskylock Computerized 936:
"The rose has been around a long time, I had one, $200 is a good deal, but I would..."
sewinsnap posted an answer for this Husqvarna Huskylock Computerized 936:
"I am considering the purchase of a Husqvarna Viking ROSE Sewing and Embroidery Machine for..."
sewinsnap posted an answer for this Husqvarna Viking 1:
"I have a Husqvarna Viking 100. How do I adjust the bobbin tension?"
sewinsnap posted an answer for this Husqvarna Viking 1:
"U do not recomend that you adjust the bobin tension, what do you have the top tension set..."
sewinsnap posted an answer for this Kenmore Sewing Machines:
"Check your wheel and see if the small wheel inside of it is tightened, I suspect that you..."
sewinsnap posted an answer for this Kenmore Sewing Machines:
"my sears sewing machine all of a sudden started moving slowly but the motor sounds like it..."
sewinsnap posted an answer for this Husqvarna Viking 1:
"top thread breaks bad tension"
sewinsnap posted an answer for this Husqvarna Viking 1:
"Top thread can break for several reasons, are you susing a quality thread and new needle?..."
sewinsnap posted an answer for this Husqvarna Designer I:
"It sounds like the disc is corrupt. Copy your program onto a new disc and try that."
sewinsnap posted an answer for this Husqvarna Designer I:
"My Husgqvarna Viking Designer 1 USB reads in my computer but when I take the USB to the..."
sewinsnap posted an answer for this Husqvarna Viking 1:
"When disc is inserted in designer 1 and try to bring up program it reads disc error Had..."
sewinsnap posted an answer for this Husqvarna Viking 1:
"I suggest that you put the disc back into your computer and copy the program again, that..."
sewinsnap posted an answer for this Husqvarna Viking 1:
"How do I adjust the lower (bobin) tension on a Viking 190"
sewinsnap posted an answer for this Husqvarna Viking 1:
"I do not recomend that you try to adjust the bottom tension at all, that will cause you..."