Love to sew
Ellen Den Dulk posted an answer for this PfaFF Creative 7570:
"I also have the same problem, I have not used the embroidery unit for a very long time. ..."
Ellen Den Dulk posted a question about Sewing Machines:
"When I received the machine, it would not run, only buzz, when I depressed the foot pedal...."
Ellen Den Dulk posted an answer for this Omega 6147 Sewing Machine:
"I am searching for similar answers and the answer above seems extreme. I would think its..."
Ellen Den Dulk posted an answer for this PfaFF Creative 7570:
"I don't know of any web video, but you may have simply forgotten a step. Guide the thread..."
Ellen Den Dulk posted an answer for this Brother XL-5130 Mechanical Sewing Machine:
"When you look at the sewing machine needle, there is a flat side on the shank (top part of..."
Ellen Den Dulk posted an answer for this Brother XL-2600:
"Pull both bottom and top thread to the back of the machine for about 10 cm or 4 inches out..."
Ellen Den Dulk posted an answer for this Brother XL-2600:
"the needle comes unthreaded when machine is started brother 2600 I"
Ellen Den Dulk posted an answer for this Baby Lock Imagine:
"It sounds like you the thread is passing a place with a burr, it could be in the needle..."
Ellen Den Dulk posted an answer for this Husqvarna Sewing Machines:
"my needle assembly is touching a thing that it shoudl not when the needle assembly is in..."
Ellen Den Dulk posted an answer for this Husqvarna Sewing Machines:
"Did the needle screw (also called thumb screw) become loose and the needle dropped?..."
Ellen Den Dulk posted an answer for this Necchi 6015 Mechanical Sewing Machine:
"Go to http://allynint.com/ Get the phone number off the web and call them, they have what..."
Ellen Den Dulk posted an answer for this Necchi 6015 Mechanical Sewing Machine:
"i have an Necchi and omega sewing machine the model is 6022. I need a bobbin case that..."
Ellen Den Dulk posted an answer for this Janome Memory Craft 10000:
"On some of my machines, they are not Janome, when I put the feed dogs back up, they will..."
Ellen Den Dulk posted an answer for this Janome Memory Craft 10000:
"Janome 423S the feed dogs wont come back up"
Ellen Den Dulk posted an answer for this Haier TQW200 Iron:
"There is a tube of some solution that you can buy at the sewing/fabric store, maybe even a..."
Ellen Den Dulk posted an answer for this Haier TQW200 Iron:
"I love my Haier TQW200 Iron. A friend was using it and something burned onto the..."
Ellen Den Dulk posted an answer for this Necchi 3101 Mechanical Sewing Machine:
"Perhaps you have a bent needle? Change the needle, make sure the size of the needle..."
Ellen Den Dulk posted an answer for this Necchi 3101 Mechanical Sewing Machine:
"I have model 3101FA. The needle jams and does not extend into the bobbin area, somethimes..."
Ellen Den Dulk posted an answer for this Singer 5062 Mechanical Sewing Machine:
"My mom took the bobbin housing apart to clean teh machine but never put it back together...."
Ellen Den Dulk posted an answer for this Singer 5062 Mechanical Sewing Machine:
"What I had missed was the little silver plate that is needed to keep the black plastic..."
Ellen Den Dulk posted an answer for this Brother MFC 240C All-In-One InkJet Printer:
"I replaced the cayan ink cartridge, and it says there is no cartridge installed. I bought..."
Ellen Den Dulk posted an answer for this Brother MFC 240C All-In-One InkJet Printer:
"I recently had the same thing. I did buy an original ink cartridge, but I rebooted the..."
Ellen Den Dulk posted an answer for this Sewing Machines:
"That sounds like a Necchi, if so go to www.allynint.com and order a new manual."
Ellen Den Dulk posted an answer for this PfaFF Hobby 4260:
"And when the fabric is thick, you can help the machine by putting some thick fabric behind..."
Ellen Den Dulk posted an answer for this Necchi Sewing Machines:
"I could not think of another way then free-motion sewing. Drop the feed dogs, and put a..."
Ellen Den Dulk posted an answer for this Janome L-344 Mechanical Sewing Machine:
"If the top thread looks normal and the bottom thread "loops", it means that the top thread..."
Ellen Den Dulk posted an answer for this Kenmore Sewing Machines:
"Sometimes there is a lot of lint build-up in the feed dog, it may want to move, but it..."
Ellen Den Dulk posted an answer for this Singer Sewing Machines:
"when you have bunching on the bottom, you have a problem with the top thread: no tension...."
Ellen Den Dulk posted an answer for this Husqvarna Viking 1:
"re insert the needle, maybe you did not put the needle up as far as it is to go. Make sure..."
Ellen Den Dulk posted an answer for this Yamata FY14U4AD:
"maybe you have a bent needle? and the looper cannot catch the loop the thread makes when..."
Ellen Den Dulk posted an answer for this Kenmore Drop-In Bobbin 16231 Mechanical Sewing Machine:
"Check to see if the feed dogs are up, maybe you somehow clicked or switched a button, it..."