brian kossman
brian kossman posted an answer for this Electrolux Vacuums:
"First replace the bag. If yours is bent it may not be pushing in button . Also check..."
brian kossman posted an answer for this Hoover Vacuums:
"You may need to step on pedal on side to engage roller. Or you coukd have a clog in base"
brian kossman posted an answer for this Hoover Vacuums:
"You may need to step on pedal on side to engage roller. Or you coukd have a clog in base"
brian kossman posted an answer for this Sebo Vacuums:
"Sounds like a bottle cap stuck in hose"
brian kossman posted an answer for this Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum:
"the short cord from neck to powerhead needs to be replaced"
brian kossman posted an answer for this Oreck Vacuums:
"You cant."
brian kossman posted an answer for this Hoover Vacuums:
"Switch or cord. Call hoover to get it replaced under warranty"
brian kossman posted an answer for this Kenmore Vacuums:
"2 screws on the bottom. then two tabs on back and two on side use flat head to separate..."
brian kossman posted an answer for this Filter Vacuums:
"make sure bag dock is sitting on top of side tabs, not pushed down below. Machine should..."
brian kossman posted an answer for this Dyson Vacuums:
"If it is pulsating, it needs to be tuned up. No power, replace battery."
brian kossman posted an answer for this Sebo Vacuums:
"Is it the canister. You also need to slide suction control in the handle of hose, to turn..."
brian kossman posted an answer for this Dyson Vacuums:
"you unscrew that side of the ball by turning the purple middle part until it comes off. ..."
brian kossman posted an answer for this Top Vacuums:
"Looking at the front of the machine, with the dirt cup off, there is a round lever with..."
brian kossman posted an answer for this Shop Vac Vacuums:
"Most likely full or clogged. Turning off to protect the motor."
brian kossman posted an answer for this Kenmore Vacuums:
"Most likely wires off in the handle, or hose needs to be replaced."
brian kossman posted an answer for this Bissell Vacuums:
"Need to replace the pump which isnt worth doing because the heating element gets very..."
brian kossman posted an answer for this Miele Vacuums:
"If it is a wand for an electric powerhead, it cant be fixed, must replace."
brian kossman posted an answer for this Bissell Vacuums:
"The pump needs to be replaced which usually isnt worth doing because the heating unit gets..."
brian kossman posted an answer for this Miele Vacuums:
"You need to replace the cordwinder. All models are different to get to cordwinder. ..."
brian kossman posted an answer for this Bosch BUC11700UC Cyclone Jet Bagless Upright Vacuum:
"It is most likely cloged. Turns off to protect the motor. check hoses, wand, and intake..."
brian kossman posted an answer for this Oreck Vacuums:
"the wheels come off my using a flat head screwdriver and leveraging it under the metal..."