James Smith posted an answer for this LG DS420 DLP Projector:
"If it happens when it warms up, you might need to clean out the unit. They build up dust..."
James Smith posted an answer for this LG RD-JT91 Multimedia Projector:
"IF it happens right away, it could be serious. If it happens when it is on for a while,..."
James Smith posted an answer for this LG DS420 DLP Projector:
"Could be the color wheel or over-heating. Make sure the vents are all clear."
James Smith posted an answer for this LG PREMIER - RD-JT50 RD-JT52 - AJ-LT50 DLP Projector:
"Should be available in the menu for the lamp options."
James Smith posted an answer for this LG RD-JT30 Multimedia Projector:
"It's not a hard-wired switch, you need to see the menu..."
James Smith posted an answer for this LG Office Equipment & Supplies:
"Make sure the unit is not full of dust.... when it gets hot the video goes screwy..."
James Smith posted an answer for this LG Office Equipment & Supplies:
"If it is intermittent, make sure it is not over heating and that it is clean on the..."
James Smith posted an answer for this BenQ 9H.J5377.13A MX501 DLP Projector XGA 2700 OPEN BOX:
"Sounds like it might be overheating. Clean out all dust and make sure the lamp can..."
James Smith posted an answer for this Office Equipment & Supplies:
"If it is intermittent, it might be over-heating. Make sure it is cleaned out and no dust..."
James Smith posted an answer for this Dukane Office Equipment & Supplies:
"You might want to: * try a different input, or a different video source * if HDMI, make..."
James Smith posted an answer for this Sony VPL ES7 SVGA 800 x 600 LCD projector - 2000 ANSI lumens:
"You might check the following: * signal is going to the input. If not, does the menu..."
James Smith posted an answer for this Office Equipment & Supplies:
"If you are sending a video signal and the projector still doesn't recognize the input you..."
James Smith posted an answer for this LG Refurbished Electronics BX501B Electronics PortabBusiness Projector SP-M251 2500AL 2000:1 1024x768:
"You'll need to go into your system setup screen on the projector and reset the lamp..."
James Smith posted an answer for this ViewSonic PJD5111 Projector:
"You need to let the projector cool down after turning it off before you turn it back on..."
James Smith posted an answer for this Mitsubishi HC5500 LCD Projector:
"The unit may need cleaning. The lamp will shut off if the air flow is blocked by dust."
James Smith posted an answer for this Pyle Video Projector and Screen Package - PRJV66 60- 100 4:3/16:9 Home Theater Video Projector - PRJS4384 84-Inch Manual Pulldown Projector Screen Standard Format 4:3 - For Home, School, Office, Business, Meetings and Presentations etc:
"Try the manufacturer's web site."
James Smith posted an answer for this ASK Proxima C420 Multimedia Projector:
"Might be a problem with the video input. Try a different cable. If HDMI, you will need a..."
James Smith posted an answer for this Office Equipment & Supplies:
"Try cleaning the unit - I have seen a number of different symptoms when they can't breathe..."
James Smith posted an answer for this Office Equipment & Supplies:
"It might be over-heating. Make sure the unit is not clogged with dust."
James Smith posted an answer for this Office Equipment & Supplies:
"Adjust the settings in the menu. It should also allow for forward or backward projection."
James Smith posted an answer for this Dell 3300MP Multimedia Projector:
"No, it could also not be getting air. Make sure to clean out the unit first."
James Smith posted an answer for this Office Equipment & Supplies:
"Reset the counter to zero from the menus."
James Smith posted an answer for this Office Equipment & Supplies:
"You can reset the counter from the menu."
James Smith posted an answer for this Office Equipment & Supplies:
"Make sure to clean out the insides also so the lamp can get air."
James Smith posted an answer for this Office Equipment & Supplies:
"Sounds like it is getting too hot after running for a while. Clean out all the dust so..."
James Smith posted an answer for this Office Equipment & Supplies:
"Might need cleaning. Make sure air is getting to the bulb and is not clogged with dust."
James Smith posted an answer for this Office Equipment & Supplies:
"You can usually use the buttons on the projector itself."
James Smith posted an answer for this Office Equipment & Supplies:
"It does not have an HDMI port."
James Smith posted an answer for this Office Equipment & Supplies:
"You can switch the up/down in the video menus."
James Smith posted an answer for this ViewSonic PJ588D Projector:
"The air flow to the lamp might be clogged. Give it a good cleaning inside..."
James Smith posted an answer for this ViewSonic PJD5111 Projector:
"Clean the unit and make sure no dust is clogging the air to the lamp."