Phonemaster4 posted an answer for this Nortel Networks Business Series Terminal T7316E:
"The voice mail system needs to be checked by computer to verify the mailbox numbers and..."
Phonemaster4 posted an answer for this Nortel Networks T7316E Telephone Platinum RoHS:
"Try to power cycle the phone system by removing power and waiting two minutes then plug it..."
Phonemaster4 posted an answer for this Nortel Networks T7316E Telephone Platinum RoHS:
"Follow this instructions to reset the Administrator password. Press Feature 985 and..."
Phonemaster4 posted an answer for this Nortel Networks T7316E Telephone Platinum RoHS:
"Change the administrator password by pressing Feature 985 dial 9 even though it is not..."
Phonemaster4 posted an answer for this Nortel Networks T7316E Telephone Platinum RoHS:
"If they can hear you on your speaker but not the handset, the handset is bad. If they..."
Phonemaster4 posted an answer for this Nortel Networks T7316E Telephone Platinum RoHS:
"That will require a programming change for your extension. If you are familiar with..."
Phonemaster4 posted an answer for this Mitel Superset 4150 Phone:
"Night 1 will direct the calls to a predetermined hunt group. The extension not ringing is..."
Phonemaster4 posted an answer for this Mitel Superset 4025 Corded Phone (mitsup4025):
"Pressing the message button should show who left the message and you can return their call..."
Phonemaster4 posted an answer for this Mitel Lands Phones:
"Look for a button on the console that is stuck down. This will cause the problem you are..."
Phonemaster4 posted an answer for this Mitel Superset 4025 Corded Phone (mitsup4025):
"When you press the message light it should show who or what turned it on. Calling them..."
Phonemaster4 posted an answer for this NorStar M7324 Telephone:
"Incomplete tree means that one of the selections has not been programmed with what to do. ..."
Phonemaster4 posted an answer for this NorStar Meridian M7310 Phone:
"Yes, set the paging group to none in programming."
Phonemaster4 posted an answer for this NorStar T7316E Corded Phone:
"sounds like your forwarding is not set in programming for no answer or busy."
Phonemaster4 posted an answer for this NorStar Meridian M7310 Phone:
"Check programming restrictions for that extension."
Phonemaster4 posted an answer for this NorStar M7310 Corded Phone:
"Check your button programming using Feature *0. If your buttons are programmed or this..."
Phonemaster4 posted an answer for this NorStar M7324 Telephone:
"bad phone or extension port try another working phone of the same type."
Phonemaster4 posted an answer for this NorStar T7316E Corded Phone:
"yes"
Phonemaster4 posted an answer for this NorStar Meridian M7310 Phone:
"Try Feature 65 or #65."
Phonemaster4 posted an answer for this NorStar T7316E Corded Phone:
"That's correct."
Phonemaster4 posted an answer for this NorStar Meridian M7310 Phone:
"Sound like a sticky button."
Phonemaster4 posted an answer for this NorStar Meridian 9516 Corded Phone:
"Most external loud ringers are analog and your phone is digital. You would also need a..."
Phonemaster4 posted an answer for this NorStar Meridian M7310 Phone:
"This is most likely done in the CCR programming. Someone that is knowledgeable in making..."
Phonemaster4 posted an answer for this NorStar M7324 Telephone:
"Try changing phones, I believe the power surge got to this phone."
Phonemaster4 posted an answer for this NorStar Meridian M7310 Phone:
"If the system did not come back when power was restored call your phone vendor."
Phonemaster4 posted an answer for this NorStar M7310 Corded Phone:
"Try swapping it with another working phone of the same type. This will tell you if the..."
Phonemaster4 posted an answer for this NorStar T7316E Telephone:
"It is the button above the redish hold button. Gray in color with a circle type of desi."
Phonemaster4 posted an answer for this NorStar M7310 Corded Phone:
"This feature requires a class trunk card in the phone system to pass Caller ID."