1
numbers819 posted an answer for this Cycling:
"I have taken bikes to Thrift Shops (Value Village, etc.), and to recycling depots when..."
numbers819numbers819 posted an answer for this Cycling:
"If it's a quill stem, you have to loosen the bolt at the top of the stem, and then tap it..."
numbers819numbers819 posted an answer for this Cycling:
"Follow this link: https://www.sheldonbrown.com/retroraleighs/dating.html You will need to..."
numbers819numbers819 posted an answer for this Pedals Cycling:
"Ebay? Aliexpress?"
numbers819numbers819 posted an answer for this Cycling:
""Bicycling" magazine has a good article on this. Here is the link ..."
numbers819numbers819 posted an answer for this Schwinn Cycling:
"Re-seat the battery. Sometimes I have to put a small piece of cardboard on top of the..."
numbers819
numbers819 posted an answer for this Topeak Peak Master Blaster Dx Pump:
"I have the DX, and I only use it for Presta valves. With mine, the lever is down to insert..."
numbers819numbers819 posted an answer for this Mavic Cycling:
"A new spoke should be around $1.00 +/-. It's better to replace it, as it sounds like the..."
numbers819numbers819 posted an answer for this Mavic Cycling:
"tightening spokes one came through rim is it possible to repair"
numbers819numbers819 posted an answer for this Cycling:
"you'll need the instruction manual. If there is no reset hole on the back of the unit,..."
numbers819numbers819 posted an answer for this Cycling:
"how do i change it from kph to mph?"
numbers819numbers819 posted an answer for this Cycling:
"loose steering"
numbers819numbers819 posted an answer for this Cycling:
"there is a threaded collar and lock nut at the top of the steerer tube that extends from..."
numbers819
numbers819 posted an answer for this Schwinn Meridian Adult 26-Inch 3-Wheel Bike:
"Schwinn Meridian rear brake squeak. Goes away with slight pressure on hand lever. ..."
numbers819numbers819 posted an answer for this Schwinn Meridian Adult 26-Inch 3-Wheel Bike:
"The brake pads should be "toe'd" in, that is, the front part of the brake pad should touch..."
numbers819
numbers819 posted an answer for this Vetta RT55 10 Function Bike Computer:
"when i am riding the bike it is not telling me the speed"
numbers819numbers819 posted an answer for this Vetta RT55 10 Function Bike Computer:
"Some possible solutions: computer unit is not "clicked in" to the handlebar mount. Remove..."
numbers819numbers819 posted an answer for this Cycling:
"the manual is at this address: ..."
numbers819numbers819 posted an answer for this Cycling:
"Manual til indstilling of cateys mity2"
numbers819
Cycling 13 answers
