2drawing/document Management, Scanning hardware
Mohan Sriraman posted an answer for this Canon DR-9080C Path-Through Scanner:
"Please check if you have enough space in your hard disk. Run a disk defrag to increase..."
Mohan Sriraman
Mohan Sriraman posted an answer for this Canon DR-2050C Path-Through Scanner:
"Clean the glass with Isopropyl Alcohol. No solvents please"
Mohan SriramanMohan Sriraman posted an answer for this Canon DR-9080C Path-Through Scanner:
"Clean the glass in the Scanning module"
Mohan Sriraman
Mohan Sriraman posted an answer for this Canon DR 5080C Path-Through Scanner:
"Paper in the scanner. Clean all the sensors."
Mohan Sriraman
Mohan Sriraman posted an answer for this Canon DR 2080C Path-Through Scanner:
"Scan a document in 300 dpi in full width. Check where the line appears in the image. For..."
Mohan Sriraman
Mohan Sriraman posted an answer for this Canon Dr 7090c Doc Scanner:
"Please run qumatool.exe after you can reset the roller count S. Mohan"
Mohan Sriraman
Mohan Sriraman posted an answer for this Canon DR-7580:
"You need to run Qumatool to reset the counter S. Mohan"
Mohan SriramanMohan Sriraman posted an answer for this Canon DR-9080C Path-Through Scanner:
"You may be running short of Disk space. Delete unwanted files and try. S. Mohan"
Mohan Sriraman
Mohan Sriraman posted an answer for this Canon DR 3060 Path-Through Scanner:
"If the 'Duplex' setting is on, the back side will also be scanned, resulting in extra..."
Mohan SriramanMohan Sriraman posted an answer for this Canon DR 2080C Path-Through Scanner:
"clean the scan module with isopropyl alcohol."
Mohan SriramanMohan Sriraman posted an answer for this Canon DR-2050C Path-Through Scanner:
"Please clean the scan module."
Mohan Sriraman
Mohan Sriraman posted an answer for this Canon DR-2580C Path-Through Scanner:
"Scan with Auto page size"
Mohan SriramanMohan Sriraman posted an answer for this Canon DR-2580C Path-Through Scanner:
"Select Auto for page size. The scanning software displays scanned image in many options,..."
Mohan Sriraman
Mohan Sriraman posted an answer for this Canon DR9050C:
"The scanner/Computer decides 'Blank pages' as a percentage of area covered. By altering..."
Mohan SriramanMohan Sriraman posted an answer for this Canon DR 2080C Path-Through Scanner:
"The top module has dirt stuck and bottom module is clean. Please clean the scan module..."
Mohan Sriraman
Mohan Sriraman posted an answer for this Canon DR-6080 imageFORMULA Scanner Pickup Roller Genuine:
"The top cover is held in position by a small piece of plastic on both sides. Open the Left..."
Mohan Sriraman
Mohan Sriraman posted an answer for this Canon DR-5010C Scanner:
"The 4 zeroes at the end are added on purpose. If you are scanning a set of documents, say..."
Mohan SriramanMohan Sriraman posted an answer for this Canon DR-9080C Path-Through Scanner:
"Uninstall the device driver, restart the Comp and reinstall the software. If the scanner..."
Mohan SriramanMohan Sriraman posted an answer for this Canon DR 5080C Path-Through Scanner:
"There is option to skip Blank pages. You have to specify in terms of percentage, above..."
Mohan Sriraman
Mohan Sriraman posted an answer for this Canon DR-5020 Path-Through Scanner:
"Check if there is enough disk space in the comp target area. Run defrag and scandisk. S...."
Mohan SriramanMohan Sriraman posted an answer for this Canon DR-5010C Scanner:
"If dirt sticks to the scan module, it will be scanned continuously and appear as a line in..."
Mohan Sriraman
Mohan Sriraman posted an answer for this Canon DR-3080CII Path-Through Flatbed Scanner:
"Please check if duplex option is ticked."
Mohan SriramanMohan Sriraman posted an answer for this Canon Dr 7090c Doc Scanner:
"If the target storage area is insufficient this will happen. Clear disk space, run..."
Mohan SriramanMohan Sriraman posted an answer for this Canon DR-5010C Scanner:
"All areas outside of the document will be black only. I don't know how you were getting..."
Mohan SriramanMohan Sriraman posted an answer for this Canon DR9050C:
"Double feeding is very unlikely with a New set of rollers, as they are clean; however if..."
Mohan SriramanMohan Sriraman posted an answer for this Canon Office Equipment & Supplies:
"There are a set of gears that convert motor rotation into lifting of the tray. Check if..."
Mohan SriramanMohan Sriraman posted an answer for this Canon Office Equipment & Supplies:
"I havent faced this problem. Try default option initially then try your settings. If this..."
Mohan SriramanMohan Sriraman posted an answer for this Canon DR-9080C Path-Through Scanner:
"Remove the paper tray, remove the cables carefully. If you turn tray upside down, you will..."
Mohan SriramanMohan Sriraman posted an answer for this Canon DR-9080C Path-Through Scanner:
"This is a common problem in 9080C. When the top cover is closed, the sensor sends light..."
Mohan SriramanMohan Sriraman posted an answer for this Canon DR-7580:
"As per the manual it is "In the event of a pick-up error, the document was fed to the..."
Mohan SriramanMohan Sriraman posted an answer for this Canon DR-3080CII Path-Through Flatbed Scanner:
"Once I had a similar problem with CapturePerfect 2.0. No amount of setting will change the..."
Mohan Sriraman
Office Equipment &... 478 answers
Computers & Internet 7 answers
Electronics - Others 1 answer
