Mediaman67 posted an answer for this Manfrotto Bogen / 3047 3 Way Pan-tilt Head Good Condition:
"I own 4 of these... what do you want to know about it?"
Mediaman67 posted an answer for this Manfrotto 503HDV Head and 351MVB2 Tripod Video Kit:
"Tip the tripod upside down, on the bottom plate where the head attaches there are 3..."
Mediaman67 posted an answer for this Manfrotto Bogen 3068 Tripod With Bogen 3066 Fluid Head Bogen:
"they don't use fluid - maybe some grease in the tilt and pan of the head, but the tripod..."
Mediaman67 posted an answer for this Manfrotto (190XB,128RC) Tripod:
"loosen the allen head screw for that legs snap lock"
Mediaman67 posted an answer for this Manfrotto Photography:
"I own this one - what seems to be the exact problem?"
Mediaman67 posted an answer for this Manfrotto Photography:
"are you just mounting a camera to the tripod itself? - you need to purchase a head as well..."
Mediaman67 posted an answer for this Manfrotto Camera Supports 3405BN JR. BLK TRIPOD W/HEAD F/NIKON:
"the quick release plate, that you are calling the "mount piece" will just snap onto the..."
Mediaman67 posted an answer for this Pentax Cameras:
"Yes, if it is a K style bayonet, it will work - Pentax allows any K mounted lens to work..."
Mediaman67 posted an answer for this Quantaray Cameras:
"What do you mean, lens support? - a 75-200 is not usually long enough to warrant this, if..."
Mediaman67 posted an answer for this Canon Rebel XT / EOS 350D Digital Camera:
"I had the same issue - I used a citrus cleaner, and then just water with a sponge - but be..."
Mediaman67 posted an answer for this Vivitar 70-210mm Macro Focusing Zoom Lens 1:4.5 Mc 52mm:
"Yes - but i need a shot of the back of the lens to tell you what you need - Thanks"
Mediaman67 posted an answer for this Vivitar Cameras:
"with the correct adaptor they will usually - but I'd need to know which one you have..."
Mediaman67 posted an answer for this 1990 Ford Aerostar:
"few things this could be - is it like a repeated sound? or just when turning? or what..."
Mediaman67 posted an answer for this 1990 Ford Aerostar:
"Check your fuses for the turn signal - also the relay unit could be bad - these are..."
Mediaman67 posted an answer for this Cub Cadet Garden:
"so, it seems like it's heat related - if you let it cool down for 2 hours, will it run..."
Mediaman67 posted an answer for this Air Tools & Compressors:
"you'd have to change the voltage regulator, which is usually inside the motor - on newer..."
Mediaman67 posted an answer for this Craftsman 3 gal. Air Compressor, 1.5 hp, Horizontal k:
"same issue I had - this is the sight glass rubber cover that bulged and blew out - I was..."