lee_annrozar posted an answer for this Nissan Cars & Trucks:
"The above answer is ok, but not all correct. You can get to it easier from the bottom of..."
lee_annrozar posted an answer for this Cars & Trucks:
"Engine overheat condition. Could be a bad sensor or a loose connection it the engine is..."
lee_annrozar posted an answer for this Cars & Trucks:
"No, for a 2003 you need a 2002-2006 engine."
lee_annrozar posted an answer for this Cub Cadet 42 And 54 Inch Blade Operator's Manual:
"If I understand your question. No, the spindles are not timed. This is if you mean where..."
lee_annrozar posted an answer for this Cub Cadet Garden:
"What model? We need more info."
lee_annrozar posted an answer for this Cub Cadet Riding Lawn Garden Zero Turn Tractor:
"Sounds like you have a carbrator that is gummed up. It will need a cleaning and a possible..."
lee_annrozar posted an answer for this Cub Cadet Garden:
"It could be a lean condition, meaning the fuel system is dirty. I think this model has..."
lee_annrozar posted an answer for this Cub Cadet Riding Lawn Garden Tractor 25hp Kohler 50":
"Yes, but most likly not. It could be the rectifier is just a loose connection."
lee_annrozar posted an answer for this Cub Cadet Garden:
"It sounds like maybe you have a broken shear pin where the drive shaft connects the hydro..."
lee_annrozar posted an answer for this Cub Cadet Garden:
"The air intake will need to be taken loose so you may need those gaskets if the old ones..."
lee_annrozar posted an answer for this 2002 Nissan Altima:
"It sounds like you have a problem with the AWU. Accelerator Working Unit, a fancy term..."
lee_annrozar posted an answer for this 2008 Nissan Frontier:
"The top rear of the engine at the valve covers."
lee_annrozar posted an answer for this Nissan Cars & Trucks:
"What engine is it? I am in the USA and it is a Versa here so it has a chain not a belt...."
lee_annrozar posted an answer for this Nissan Cars & Trucks:
"The coil pack at the crankpully is #1 and the is where that front cover is. So it will be..."
lee_annrozar posted an answer for this Nissan Cars & Trucks:
"It could be a crank sensor issue. It is hard to tell just from what info you provided. Go..."
lee_annrozar posted an answer for this 2003 Nissan Altima:
"Yes, I would use the Nissan oil filters. The filters have a check valve in them to keep..."
lee_annrozar posted an answer for this 2003 Nissan Altima:
"This sounds like a electrical problem. This car has no distributor rotor, cap or..."
lee_annrozar posted an answer for this 2003 Nissan Altima:
"This is on the air/fuel sensor that is mounted in the exhaust manifold right behind the..."
lee_annrozar posted an answer for this 2003 Nissan Altima:
"I do not have a picture, but it is located on the right side of the engine on the back..."
lee_annrozar posted an answer for this 2004 Chevrolet Silverado 1500 Crew Cab:
"The crank sensor is on the back side of the engine next to the firewall. Not sure if this..."
lee_annrozar posted an answer for this 2003 Nissan Altima:
"The accelerator is a potentiometer connected to a pedel and the wires go directly to the..."
lee_annrozar posted an answer for this 2003 Nissan Altima:
"Need more info. I work at the plant where these are made and we do not call any of the..."
lee_annrozar posted an answer for this 2003 Nissan Altima:
"The 2.5 and the 3.5 transmissions are the same except for the side cover where the output..."
lee_annrozar posted an answer for this 2003 Nissan Altima:
"The cam sensor is mounted in top of the engine on the right side of the engine where the..."
lee_annrozar posted an answer for this 2005 Nissan Altima:
"Hello, This is natural for this car. If the crank sensor was bad the car would not start."