kevin duggan posted an answer for this HP Designjet T610 InkJet Printer:
"Check the carriage belt for wear. Is there an error code?"
kevin duggan posted an answer for this HP DesignJet 500ps InkJet Printer:
"your service station is not working correctly. you will need to replace that assembly."
kevin duggan posted an answer for this HP DesignJet 500ps InkJet Printer:
"check the carriage belt assembly. check the teeth on the motor that drives the belt..."
kevin duggan posted an answer for this HP DesignJet 500ps InkJet Printer:
"check the media you have selected. if you have the wrong media selected, the cutter will..."
kevin duggan posted an answer for this HP Color LaserJet 8550n Printer:
"this is usually not caused by the paper tray. this problem is usually caused by the fuser..."
kevin duggan posted an answer for this HP DesignJet 1050c InkJet Printer:
"System Error: 080001 (Non-Continuable) Problem Description: PostScript Error. Corrective..."
kevin duggan posted an answer for this HP DesignJet 1050c InkJet Printer:
"System Error: 09xxxx (Non-Continuable) Problem Description: EIO Accessories (EIO Card/Hard..."
kevin duggan posted an answer for this HP DesignJet 1050c InkJet Printer:
"System Error: 04Cxxx Problem Description: EIO Accessories (EIO Card/Hard Disk Drive)..."
kevin duggan posted an answer for this HP DesignJet 1050c InkJet Printer:
"the only way to change the status is to change printheads."
kevin duggan posted an answer for this HP DesignJet 1050c InkJet Printer:
"there is an issue with your carriage assembly. it cannot move freely across the carriage..."
kevin duggan posted an answer for this HP DesignJet 1050c InkJet Printer:
"System Error: 0C0032 (Continuable) Problem Description: Drop Detector not Calibrated for..."
kevin duggan posted an answer for this HP DesignJet 1050c InkJet Printer:
"you cannot get an extended contract for this machine from HP. if you can get a local..."
kevin duggan posted an answer for this HP DesignJet 1050c InkJet Printer:
"System Error: 0A0010 Problem Description: Problem in Pressurizing the Air System...."
kevin duggan posted an answer for this HP DesignJet 1050c InkJet Printer:
"the electronics module is in the rear of the machine and controls the printer. you have..."
kevin duggan posted an answer for this HP Designjet Z6100 InkJet Printer:
"the only part that is behind your ink cartridges is your air pressurization system. if you..."
kevin duggan posted an answer for this HP DesignJet 1055cm InkJet Printer:
"this is a problem with the APS. (air pressuration system) check for kinks in the aps..."
kevin duggan posted an answer for this HP DesignJet 500ps (42 in.) InkJet Printer:
"86.01 can be a couple of issues pertaining to the movement of the carriage assembly. 1...."
kevin duggan posted an answer for this HP LaserJet 1320n Printer:
"i don't think that is a back roller, is more than likely your fusing assembly. that would..."
kevin duggan posted an answer for this HP LaserJet 2430dtn Printer:
"all **** that you can't decipher? try reloading your print driver, that should resolve..."
kevin duggan posted an answer for this HP LaserJet 4000n Printer:
"can you remove the fuser? if i remember correctly there is a switch or flag under the..."
kevin duggan posted an answer for this HP Designjet 5500 (42 in.) InkJet Printer:
"there is a blockage and you need to replace your tube assembly. and maybe your APS."
kevin duggan posted an answer for this HP DesignJet 5500PS InkJet Printer:
"you are correct, this is usually caused by the contacts going bad on the carriage..."
kevin duggan posted an answer for this HP DesignJet 1050c plus InkJet Printer:
"this is a carriage belt assembly problem. check inside the printer for debris under the..."
kevin duggan posted an answer for this HP DesignJet 2500cp InkJet Printer:
"no. sorry Rick but i think you really need to replace the carriage assembly, if you can..."
kevin duggan posted an answer for this HP DesignJet 1055cm InkJet Printer:
"you can run this printer without an hdd. disconnect the power from the hdd.you may have to..."
kevin duggan posted an answer for this HP DesignJet 1055cm InkJet Printer:
"more than likely the slot in your carriage assembly is faulty. try cleaning the contacts..."
kevin duggan posted an answer for this HP DesignJet 800 Printer:
"System Error: 86:01 Problem Description: Carriage-Axis shutdown. Corrective Action: If..."
kevin duggan posted an answer for this HP DesignJet 500ps (42 in.) InkJet Printer:
"what kind of alignment error?"
kevin duggan posted an answer for this HP DesignJet 3500cp InkJet Printer:
"very carefully, if you can find a belt replacement. i would be surprized if you can find..."
kevin duggan posted an answer for this HP DesignJet 500ps (42 in.) InkJet Printer:
"this is always dependant on what kind of coverage (%) you are doing on the paper."
kevin duggan posted an answer for this HP DesignJet 1050c plus InkJet Printer:
"if i remember correctly you can not do edge to edge on this printer. you may have the..."