Fly Like Eagle
kagimu joseph posted an answer for this Toshiba Office Equipment & Supplies:
"Sorry wanted to help you but the pic is not clear call me on +256702155632"
kagimu joseph posted an answer for this Toshiba Office Equipment & Supplies:
"Hi hope your okay sorry about the issue for your machine worry not am here to help..."
kagimu joseph posted an answer for this Kyocera Office Equipment & Supplies:
"The only solution is to clean the discharge lamp of the drum housing and also making sure..."
kagimu joseph posted an answer for this Toshiba E-Studio 182 Copy Machine:
"Let me hope your using the wright Toner If not check the chip where the cartridge sit..."
kagimu joseph posted an answer for this Kyocera Office Equipment & Supplies:
"Hello, let me hope your doing fine sorry about the machine problem did you tried to change..."
kagimu joseph posted an answer for this Kyocera Office Equipment & Supplies:
"The problem is the main board is faulty or it needs to be upgrading its firmware mostly..."
kagimu joseph posted an answer for this Toshiba Office Equipment & Supplies:
"1. Turn the power of the equipment OFF and check the connection of the HDD. - Connector..."
kagimu joseph posted an answer for this Kyocera Office Equipment & Supplies:
"First of all try clean the slit glass with wet towel if the lines persist change the..."
kagimu joseph posted an answer for this Kyocera Office Equipment & Supplies:
"check whether your using the wright Toner cartridge secondly is the transfer bias spring..."
kagimu joseph posted an answer for this Canon Office Equipment & Supplies:
"E197 Error Codes caused by electrical noise. DETAILS: The error code E197-0000 (laser..."
kagimu joseph posted an answer for this toner Office Equipment & Supplies:
"Check if the front door is closing properly. Check if Toner cartridge is installed..."
kagimu joseph posted an answer for this Kyocera Office Equipment & Supplies:
"Email me @[email protected] for any type of firmware you need"
kagimu joseph posted an answer for this Office Equipment & Supplies:
"Hope your doing well, Go to brother..."
kagimu joseph posted an answer for this Kyocera Km-6030 With Feed, Finisher, Bank, Print, Scan - 270k Copies:
"Defective developing humidity sensor or poor contact insertion connector problem try to..."
kagimu joseph posted an answer for this Kyocera Km-6030 With Feed, Finisher, Bank, Print, Scan - 270k Copies:
"Enter service mode 1087twice key pad in 935 the you follow these steps Setting 1. Press..."
kagimu joseph posted an answer for this Office Equipment & Supplies:
"Fuser heater break Fuser thermistor 1 detected less than 70°C/158°F for 10 s during..."
kagimu joseph posted an answer for this Toshiba e-Studio 181 Digital Copier:
"enter the maintenance mode of 05 then 2000 and start"
kagimu joseph posted an answer for this Office Equipment & Supplies:
"E100-0000: thats a laser scanner unit error. Solution 1: Turn off the printer, wait 10..."
kagimu joseph posted an answer for this Kyocera Office Equipment & Supplies:
"Just clean the laser unit"
kagimu joseph posted an answer for this Kyocera Office Equipment & Supplies:
"Check the connection of the machine whether the server in on, is the network cable..."
kagimu joseph posted an answer for this Office Equipment & Supplies:
"The conditions of the PM display consist of the codes of the setting mode (08) for "the..."
kagimu joseph posted an answer for this Office Equipment & Supplies:
"Sorry about that problem its a Defective polygon motor now what you can do open the..."
kagimu joseph posted an answer for this Toshiba Office Equipment & Supplies:
"fuser related problem but try out this Check if the connectors are disconnected. (2) Check..."
kagimu joseph posted an answer for this Toshiba Office Equipment & Supplies:
"fuser related problem"
kagimu joseph posted an answer for this Toshiba Office Equipment & Supplies:
"HDD error code but at least another time try to specify the model so that you get..."
kagimu joseph posted an answer for this Cannon Office Equipment & Supplies:
"The main thermistor reading is lower than 140C when paper is moved The fixing film unit is..."
kagimu joseph posted an answer for this Kyocera Office Equipment & Supplies:
"Tell me the model of the machine"
kagimu joseph posted an answer for this Toshiba E-Studio 225 Multifunction Copier:
"1. Key in "0" for 08-6198 (Switching of output pages/driving counts at PM [process unit..."
kagimu joseph posted an answer for this Toshiba Office Equipment & Supplies:
"fuser related code Check if the connectors are disconnected. 2. Check if the center, side..."
kagimu joseph posted an answer for this Kyocera Mita KM-2050 Printer:
"Zero-cross signal error While fuser heater ON/OFF control is performed, the zero-cross..."
kagimu joseph posted an answer for this Kyocera Mita KM-1815 All-In-One Laser Printer:
"Fuser heater break Fuser thermistor 1 detected less than 70°C/158°F for 10 s during..."