John posted an answer for this KitchenAid Microwave Convection Oven:
"The door switches are the problem. Well, actually one of them is. when you open and close..."
John posted an answer for this Microwave Ovens:
"Fuse and door switches."
John posted an answer for this Microwave Ovens:
"control board is bad."
John posted an answer for this Microwave Ovens:
"Some MWs have an access panel for the light. Most need to remove the cover to get to the..."
John posted an answer for this Panasonic Microwave Ovens:
"Sounds like you didn't block the top vents. If it is not vented the top vents must be..."
John posted an answer for this GE JE1640WA/GA Microwave Oven:
"What do you mean you checked the door interlocks? did you remove them and take a..."
John posted an answer for this Smeg Microwave Ovens:
"Does the light come on when you open the door? If it does, I would venture to guess that..."
John posted an answer for this In Microwave Ovens:
"Incomplete question. What seems to be the problem? Did the wire come apart? Is the outlet ..."
John posted an answer for this Samsung DLP HL-P4663W 46" Rear Projection HDTV-Ready Television:
"The main board is more than likely the cause of the trouble. Time for a new TV."
John posted an answer for this Minn Kota Maxxum 70 Freshwater Bow Mount Trolling Motor:
"Does the splice get hot when you are running the motor? If yes, then the splice could..."
John posted an answer for this In Microwave Ovens:
"Some are easy, some require you to open up the cabinet. If you cant get to the bulb front..."
John posted an answer for this Panasonic Microwave Ovens:
"Just as a guess, this is not an inverter microwave, correct? The offending part is more..."
John posted an answer for this Kenmore Microwave Ovens:
"If it pretends to run, it will be the magnetron."
John posted an answer for this Whirlpool Gold GH5184XPS 1.8 Cu. Ft. Over the Range Microwave Oven - Stainless Steel:
"Good question. I have never heard that one before. Good luck"
John posted an answer for this Microwave Ovens:
"Some can be accessed from the cavity some from the back and most by opening the cover on..."
John posted an answer for this Microwave Ovens:
"One of the door switches."
John posted an answer for this Maytag MMV5207BAW Microwave Oven:
"Possibly three parts. Take it apart and look for the broken one."
John posted an answer for this Microwave Ovens:
"The fuse is never the problem. It is a symptom. It will be a door switch (90% of the..."
John posted an answer for this Breville Quick Touch Microwave Oven, BMO734:
"One of the door switches"
John posted an answer for this Microwave Ovens:
"Not recommended."
John posted an answer for this Kenmore Microwave Ovens:
"Sounds like the microwave thinks it is running at 50Hz. They sense this automatically...."
John posted an answer for this Microwave Ovens:
"There are only two parts it could be. The control panel or the keypad. My money is on the..."
John posted an answer for this Microwave Ovens:
"It will be one or more of the three door switches"
John posted an answer for this GE Monogram ZE2160SF Convection / Microwave Oven:
"Control panel"
John posted an answer for this Microwave Ovens:
"Obviously pull the handle, if that doesn't work you have a broken part in the assembly...."
John posted an answer for this Microwave Ovens:
"Cooling"
John posted an answer for this Magic Chef Over The Range Microwave:
"Replace the defective door switch"
John posted an answer for this Sunbeam Sm0701a7e Microwave Ovens:
"It varies with the model. If the plastic cover pops out from the cavity side that is how..."
John posted an answer for this Salton Microwave Ovens:
"No you didn't. Probably the magnetron since the oven is pretending to work."
John posted an answer for this Microwave Ovens:
"Turntable motor or the plastic piece on the shaft."