handymanstan

All Activity

• 

  handymanstan posted a question about Sharp Televison & Video:

  "factory reset fopr sharp model lc-70le735x"

  • handymanstan
  • Over a year ago
  • Go to question page »
• 

  handymanstan posted an answer for this Maytag Washing Machines:

  "You can adjust the belt/motor tension on this unit Open the back panel and you will see..."

  • handymanstan
  • Over a year ago
  • Go to answer page »
• 

  handymanstan posted an answer for this DeLonghi Espresso And Cappuccino Maker - Ec860:

  "Witch red light? Could be that the red light telling you to descale the unit is..."

  • handymanstan
  • Over a year ago
  • Go to answer page »
• 

  handymanstan posted an answer for this DeLonghi Coffee Makers & Espresso Machines:

  "leave the power point turned on. turn off machine at the power switch (on the unit) This..."

  • handymanstan
  • Over a year ago
  • Go to answer page »
• 

  handymanstan posted an answer for this DeLonghi Coffee Makers & Espresso Machines:

  "looks like the micro switch on the bottom might have some coffee grounds and prevent the..."

  • handymanstan
  • Over a year ago
  • Go to answer page »
• 

  handymanstan posted an answer for this DeLonghi Coffee Makers & Espresso Machines:

  "Sound like the filter strainer is clogged: Try taking out the whole internal coffee..."

  • handymanstan
  • Over a year ago
  • Go to answer page »
• 

  handymanstan posted an answer for this Neptune Washing Machines:

  "It sounds like you may have dislodged an "out of balance" switch. Or the drain pump may..."

  • handymanstan
  • Over a year ago
  • Go to answer page »
• 

  handymanstan posted an answer for this Maytag Washing Machines:

  "Tripping a breaker indicates a large current draw...possibly from a motor or a solenoid"

  • handymanstan
  • Over a year ago
  • Go to answer page »
• 

  handymanstan posted an answer for this Maytag Washing Machines:

  "He has probably dislodged a socket with wiring as replacing a bearing is not electrical...."

  • handymanstan
  • Over a year ago
  • Go to answer page »
• 

  handymanstan posted an answer for this Maytag MAH6700AWW Neptune Front-Load Washer:

  "a slow spin sometimes indicates that a out of balance switch might be malfunctioning"

  • handymanstan
  • Over a year ago
  • Go to answer page »
• 

  handymanstan posted an answer for this Maytag Parts Washing Machines:

  "sounds like the motor start cap to me too"

  • handymanstan
  • Over a year ago
  • Go to answer page »
• 

  handymanstan posted an answer for this Maytag Neptune MAH6500A Front Load Washer:

  "The problem is that the seals are leaking and allowing water to attack the tub..."

  • handymanstan
  • Over a year ago
  • Go to answer page »
• 
  handymanstan Commented on an answer to the question about Maytag Neptune Washer. Over a year ago
• 

  handymanstan posted an answer for this Maytag Neptune Washer:

  "If the drain pump malfunctions...or is clogged then it will not empty within the time..."

  • handymanstan
  • Over a year ago
  • Go to answer page »