Wont quit until its fixed.
Chuck Clark posted an answer for this Kyocera Office Equipment & Supplies:
"Clear the document from the print queue, unplug the print cable from the printer and..."
Chuck Clark posted an answer for this Office Equipment & Supplies:
"Hi, I have the copystar CS 1815, service & parts manual. It's the same as KM 1815. My..."
Chuck Clark posted an answer for this Office Equipment & Supplies:
"The optics may be dirty or you could have a bad drum cleaning blade."
Chuck Clark posted an answer for this Sharp AR-5316 Advanced Digital Imager Copier:
"The L6 code means trouble with the laser unit ( polygon motor), it has to be replaced. The..."
Chuck Clark posted an answer for this Copystar CS-1510 Copier:
"The "AP" means the machine is adding toner, AP is adding powder. Let the machine cycle for..."
Chuck Clark posted an answer for this Office Equipment & Supplies:
"The black lines you have sound like a bad drum cleaning blade. If you want to take out the..."
Chuck Clark posted an answer for this Office Equipment & Supplies:
"The E-7 code is a laser unit code. The laser unit is bad, the cost to repair it maybe..."
Chuck Clark posted an answer for this Office Equipment & Supplies:
"some printers will not let you continue printing if one of the toner cartridges are empty,..."
Chuck Clark posted an answer for this Sharp AR-M455N Copier:
"If you do not have developer in the machine it will not print. let me know if you have it..."
Chuck Clark posted an answer for this Canon imageCLASS D761 Copier:
"I'am sorry to say that you have to replace the fusing unit on that machine, when it jams..."
Chuck Clark posted an answer for this Brother HL 1850 Laser Printer:
"E50 is fuser code, it has blown the heat lamp or thermal fuse. the best solution is to..."
Chuck Clark posted an answer for this HP LaserJet 2300d Printer:
"sounds like it is a bad toner cartridge. If you still have your old toner cart., try that..."
Chuck Clark posted an answer for this Xerox WorkCentre XD120f Copier:
"it sounds like the heat roller gear has broken. open machine and look @ the heat section..."
Chuck Clark posted an answer for this Xerox WorkCentre XD100 All-In-One Laser Printer:
"do you mean L6, I dont recall a J6 on that machine. if you have an L6 that means the laser..."
Chuck Clark posted an answer for this Xerox WorkCentre XD100 All-In-One Laser Printer:
"sounds like the registration clutch is sticking, unplug machine. the reg. clutch is..."
Chuck Clark posted an answer for this Xerox WorkCentre XD100 All-In-One Laser Printer:
"is the add toner light on if it is it will only make one copy @ a time."
Chuck Clark posted an answer for this Brother HL 1440 Laser Printer:
"clean the paper feed tires with some alcahol. they are located in the upper part of the..."
Chuck Clark posted an answer for this Brother HL 1440 Laser Printer:
"they are stuck in the fuser unit, try to take out the toner cartridge to see if you can..."
Chuck Clark posted an answer for this HP Color LaserJet 8550dn Printer:
"did you download the print drvers for the printer. the printer is not a plug & print . you..."
Chuck Clark posted an answer for this Sharp AL 1631 Copier:
"check in the exit part of the machine, front edge there is a holding pin that may not be..."
Chuck Clark posted an answer for this Kyocera RI-3530 Black and White Copier:
"toner sensor not set properly, or the toner sensor is bad. what is the make and model, it..."
Chuck Clark posted an answer for this Ricoh Aficio CL2000N Laser Printer:
"save your self the trouble and just buy the toner cartridge you need. I Think you can go..."
Chuck Clark posted an answer for this Epson Stylus C66 Inkjet Printer:
"disconnect printer, uninstall drivers, reinstall drivers & connect printer for set up new..."
Chuck Clark posted an answer for this Brother HL 1430 Laser Printer:
"try to unplug machine for a couple of minutes. make sure that it is not out of..."
Chuck Clark posted an answer for this Kyocera Mita KM-3035 All-In-One Laser Printer:
"Sounds like print card maybe bad."
Chuck Clark posted an answer for this Xerox WorkCentre XD100 All-In-One Laser Printer:
"check for a paper jam in the machine and in the paper tray, if no paper is found take out..."
Chuck Clark posted an answer for this Office Equipment & Supplies:
"sounds to me that the power supply has blown, or fuse onthe power supply. If you remove..."
Chuck Clark posted an answer for this Toshiba 1360 Black and White Copier:
"You can reset the C7 code, hold down 0&8 power machine up. Then push 87 & print, change..."
Chuck Clark posted an answer for this Kyocera KM-1505 Copier:
"Bad laser unit, it is located under the exit tray in the middle of the machine. If you..."
Chuck Clark posted a question about Office Equipment & Supplies:
"Hi, hope you can shed some light on a problem I'am having, The machine was unpluged with..."