george peters posted an answer for this Vodavi Lands Phones:
"If all of thephones are working,the phone programming is correct, andthetimeand date are..."
george peters posted an answer for this In Office Equipment & Supplies:
"One thousand"
george peters posted an answer for this NorStar T7208 Corded Phone:
"It's the button above the hold key. It looks like a globe or a picture of Saturn."
george peters posted an answer for this Nortel Meridian M7208 Corded Phone:
"It might be that your pick up key is mislabeled/programmed. Press feature * 0 then the..."
george peters posted an answer for this NorStar Meridian M7310 Phone:
"There is no power cord attached to a 7310 set. it obtains its power from the processor"
george peters posted an answer for this NorStar M7324 Telephone:
"That might mean that the line(s) is(are) not programmed for that telephone. If you press..."
george peters posted an answer for this Nortel Meridian M7208 Corded Phone:
"Programming for the voice mail is done on M7310, M7324, or T7316e sets. Try finding one of..."
george peters posted an answer for this NorStar M7310 Corded Phone:
"With the handset down, press feature *0 then press your intercom key. your extension..."
george peters posted an answer for this Panasonic KX-T7730 Corded Phone:
"Programming is done on 7310, 7324 and 7316 type sets. Enter programming by pressing the..."
george peters posted an answer for this Lucent PARTNER18 Corded Phone:
"Sounds like the line 3 button on that set is programmed as something else. When you press..."
george peters posted an answer for this NorStar T7316E Corded Phone:
"If your voice mail feature codes arent working(F983, F981 etc,)then the voice mail is not..."
george peters posted an answer for this NorStar T7316E Corded Phone:
"Below the event message it should be also display"time" and "clear"on the screen...."
george peters posted an answer for this Panduit CAT6 TX-6 8P8W MODULE BLUE (CJ688TGBU):
"The EGJT tool assists in terminating all enhanced Giga-TX? Style Jack Modules by ensuring..."
george peters posted an answer for this NorStar Startalk Flash 2 Phone:
"To set the time on the startalk 180: enter feature 984 the display should say log: enter..."
george peters posted an answer for this NorStar Startalk Flash 2 Phone:
"How do you change the time on the NorstarTalk 180?"
george peters posted an answer for this NorStar Meridian M7310 Phone:
"can i put 2 M7310 meridian phones into 1 wall jack?"
george peters posted an answer for this NorStar Meridian M7310 Phone:
"No. Each jack is an indivual port and can't be shared or split.You can however hook up..."
george peters posted an answer for this NorStar BCM-T7208 Corded Phone:
"I am trying to change the names that appear on my phones i.e. people who have left but..."
george peters posted an answer for this NorStar BCM-T7208 Corded Phone:
"To change the names in the telephone system you'll need to enter programming. Programming..."
george peters posted an answer for this NorStar M7310 Phone:
"To reset your voice mail password,on press feature 983 the screen should say log: enter..."
george peters posted an answer for this NorStar T7316E Corded Phone:
"More than likely a co-worker used the "send message" feature on thier set. Under where it..."
george peters posted an answer for this NorStar T7316E Corded Phone:
"The voicemail light stays on and message on phone reads "Message for you" on..."
george peters posted an answer for this Avaya MLS 18D 2-Line Corded Phone:
"The program your looking for is #310 VMS cover enter in the new extension number and press..."
george peters posted an answer for this Avaya MLS 18D 2-Line Corded Phone:
"ADDED NEW PHONE TO SYSTEM, BUT CAN NOT GET THE CALLS TO GO TO VOICE MAIL AFTER PROGRAMMING..."
george peters posted an answer for this NorStar T7316E Corded Phone:
"press feature #1."
george peters posted an answer for this NorStar T7316E Corded Phone:
"To reset the administrator pasword enter feature 985 press 9, at the password prompt enter..."