Fix it Dude
James Cole posted an answer for this Washing Machines:
"Motor running too hot"
James Cole posted an answer for this Washing Machines:
"Lid switch is bad, or disconnected"
James Cole posted an answer for this Heating & Cooling:
"Behind access panel, or on left side of furnace on inner wall"
James Cole posted an answer for this Maytag Atlantis MAV6000 Top Load Washer:
"There are 2 screws behind panel. Remove to lift panel, remove the 2 clips and disconnect..."
James Cole posted an answer for this Heating & Cooling:
"Sounds like the speaker cone is tore."
James Cole posted an answer for this Washing Machines:
"You have a bad lid switch."
James Cole posted a question about Cars & Trucks:
"checked fuses in both boxes, not sure of problem."
James Cole posted an answer for this Fisher and Paykel Washing Machines:
"water fill solenoid has faulted. look to replace fill valve."
James Cole posted an answer for this Washing Machines:
"the lid switch is faulty. located under lid on left side of machine."
James Cole posted an answer for this Whirlpool Washing Machines:
"you have a bad lid switch. located under lid on left side of machine."
James Cole posted an answer for this Goodman Manufacturing MSG12CRN1N - MSG12CRN1W - 12,000 Btu/h 13 Seer Goodman Single-Zone Mini Split Air Conditioning System:
"need to read inside diagram, will tell u what lights mean."
James Cole posted an answer for this Microwave Ovens:
"DO NOT EAT OR REFREEZE. THROW FOOD AWAY."
James Cole posted an answer for this Microwave Ovens:
"The freezer door was accidently left open and packages of meats and meat and vegetables..."
James Cole posted an answer for this Microwave Ovens:
"There should be a screw in the cover, that requires a 5/8 inch nut driver to remove."
James Cole posted an answer for this Microwave Ovens:
"Frig stopped cooling all together then ran water on floor two days later. I'm looking..."
James Cole posted an answer for this Maytag Dryers:
"You can find it if you remove the back panel."
James Cole posted an answer for this Maytag Dryers:
"MY MAYTAG NEPTUNE DRYER MODEL MDE9700AYW WILL NOT HEAT CALLED AND REPAIR PERSON SENT OUT A..."
James Cole posted an answer for this Price Pfister J170-B Chrome/Brass 100 Single Handle Pressure Balanced Showe:
"Sounds like the stem or o-ring behind the handle are bad. Shhut water off to faucet,..."
James Cole posted an answer for this Price Pfister J170-B Chrome/Brass 100 Single Handle Pressure Balanced Showe:
"The handle will not turn off the water."
James Cole posted an answer for this Heating & Cooling:
"Check the air vents in that room to ensure they are open. Or try closing a few other vents..."
James Cole posted an answer for this Microwave Ovens:
"where to find model number on convection oven/range"
James Cole posted an answer for this Microwave Ovens:
"When you open the door it should be on the rim of the opening. or it could be located on..."
James Cole posted an answer for this Whirlpool Dryers:
"Inglis dryer...Model #IED4400VQ My dryer will not rotate. It is getting hot but just..."
James Cole posted an answer for this Whirlpool Dryers:
"Check your owners manual, it should be at least a 1 year manufacturer warranty. Sounds..."
James Cole posted an answer for this Heating & Cooling:
"If it is a split-system with a condensor unit outside, there are 2 fuses in the cut off..."
James Cole posted an answer for this Heating & Cooling:
"I was replacing an old thermostat and for got to cut the power off to it, now it don't..."
James Cole posted an answer for this Heating & Cooling:
"You may want to check the evaporator drain line for a blockage. You should see this line..."
James Cole posted an answer for this Heating & Cooling:
"why is air conditioner a split unit leaking on the inside???"
James Cole posted an answer for this Microwave Ovens:
"Check the inside top of the microwave, may have fallen off from above glass tray."