Zanussi Ovens - Page 9 - Recent Questions, Troubleshooting & Support
Change bottom element
This is very easy to do. Unplug the over, take the racks out, when the heating element is plugged into the oven there should be two screws. Take them out an unplug the heating element. Plug in the new one which you can either order on line or get from an appliance repair company. They run between $35-50. But plug that in put the screws back in, plug the oven in an you should be ready to go. I've replaced 3 in my oven
Replace light
The instructions state:
1. Ensure the oven is disconnected from the electrical supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
Fan and element not working
hi not sure if you've had a reply but when my zanussi main oven stopped working i just changed the element (purchased from e bay).
open oven door and the back you will see 4 screws(basically 4 corners) remove these screws and you will see the element, pretty straight forward to remove, obviously fan wont work until you have heat (hopefully fan ok) you can give this a go, cheaper than buying a new oven. i have done this twice. hope this helps.
Not finding what you are looking for?