Wharfedale Televison & Video - Page 7 - Recent Questions, Troubleshooting & Support

Hello

Just check with the following Wharfdale codes

0037 0861 0519 0556
OK

May be that the laser assy is dirty...you can try one of those cleaner discs...although I recommend you have it professionally cleaned...have not had much luck with cleaner discs...if that does not solve the problem..then the laser itself may have gone bad...they have a lifespan and only will last so long

hi,
may be ur dvd players laser pickup unit may have some problem. may be is lance need cleaning. open the cover and clean the laser pickup units Lance with an ear bud. do not use any pressure. also don't use any chemical. it will damage the unit.after cleaning just inset a disk and check it. if problem remains ur dvd's laser pickup need to be replaced.
another way is bought a lance cleaning cd from the market if available. insert it in ur dvd. it will clean ur dvds lance to some extend.
ok

No,many small DVD players compannies makers used difference ending codes,that was patent by the big tv corporations,that also make DVD players.That why u couldn't play from one DVD player to the next DVD players.

Hi,
Press Stop button to stop dvd playback, press and hold STOP button for 6-7 seconds on dvd player front that will turn Off Interlace video output.
If that does not fix the problem, connect this unit with tv through Component Video jacks as same would be available in tv to get picture, dvd player has been set on Progressive mode.
Hope these info will help you.
Thanks.

I would try cleaning laser with cotton bud dipped in cleaning solution, If this dosnt fix problem you may nead a new laser or dvd drive.
pete

Hello,

When you have your DVD player loading disc but saying no disc, it simply means, there is a problem with the player.

The problem is a minor one, and it is related with the lens of the player. It is either weak or dirty, therefore it does not have the strength to play a disc.

The solution to that is either for you to clean it with a lens cleaner or open it up and clean it using a cotton bud. But if that does not solve the problem, you will have to replace the lens with a new one, and to do that, you will have to unscrew the dvd player open, then unscrew the disc tray, then you will have direct access to the lens, disconnect it from the ribbon that supports it, then fix in a new lens in it and reverse the process to reassemble the player together.

After doing that, your player would be in good condition once again.

Take care and good luck

hmm...similar problem here. i've taken the hdd out and plugged it in to the ide port inside my pc. The problem is it's the wrong file system. Your pc will not see it. It is however just a normal hdd so you can re-partition it and give it a new file systm ie ntfs but you lose all the data :(. that's as far as i've got, hope it helps someone.

Free search and downmload movie for your devices, you can visit here: http://free- download-films.com/
No membership. no account, no virus, free high quality movie in ipod format, iphone format mp4 player format, zune format, ....
trustworthy, reliable.

Hi.

If the unit stays stuck in startup with the hello message, that means that there is either a software problem, or that there is a disk inside the unit.

Try first simply disconnecting the DVD player power cord for a couple of minutes. After connecting back, try pushing repeatedly the eject button while you start up the player. If there is a stuck DVD it will come out.
The operation is described here:DVD player.

If that does not work, contact Whaferdale using the online form here.

Regards.

Ginko.

Hello.
If its brand new, it might be possible you have received a faulty unit.
Please sent it back to the company to get it replace for a new one.

I have a C TECH URC 10, and while doing the set up my TV(telefunken) whent blank and just the red standby light flashes.
Now I do not have any control,and cannot reset anything.

Hi I have the same problem, did you find a soloution?

thus it has power and no need to check the fuse you have a code problem and need to find out what it means try firing it up with no leads connected if no go email me

[email protected]

cheers

I have the exact same problem, did u figure out why? plz email me at [email protected]

Don't know if it's any help, but tvmanualsonline have a manual for a WH-TV/DVD21NO combination TV/DVD for download.

U have a LCD tv any models?Just buy a HDMI cable,one side of cable hook to the HDMI in the Wharfedale hub,the orther side to the HDMI LCD tv hub.Power on,play the thing,go to the LCD tv,go in the LCD tv menu pick HDMI 1,2,3 will get the movie or what u playing?If the Wharfedale work.

Check you video cable if it is well connected if it is then interchange the cables using the one for the audio for the video and other one for the video to connect the audio . If there is no sound then the video cable is bad and need changing but if it produces sound then you will need to visit a local repair man