West Bend Food Mixers - Recent Questions, Troubleshooting & Support
My West Bend Mixer Model #41036 The bowls won't turn automatically I have to stand and spin the bowl
The beater with the nylon pad should be making contact (if it is still on the beater) when the head is lowered into the bowl. This is what rotates the bowl. If it's not making contact, lift the head and look at the area where it pivots, and you will see the adjustment screw. Loosen the lock nut and turn the screw "in" to lower the head more. Check for contact and when it is sufficient, tighten locknut.
We have a part missing
If you are still looking for this part, please post. I may part out a #410236 I recently bought at an auction, because I can't find beaters.
Replacement beaters West Bend 41036
The official parts source for West Bend advises that replacement parts for this product are no longer available.You might try making an inquiry from this site; they also list these parts as no longer available, but perhaps they can reommend a compatible repalcement:
http://www.abtecparts.com/parts_enquiry.htmFailing that suggest you take your old beaters to a small appliance repair shop and see if they can source a compatible replacement.
Not finding what you are looking for?