Warmrails Home - Recent Questions, Troubleshooting & Support

Can I buy a new SW360 or a new switch and switch housing?

call the company directly at 877-927-6724. Explain the problem and they will assist you or replace your unit.

An electronics shop or auto parts store should have one but it might not be an exact fit. If the switch is stuck in the ON position you could just leave it and put a new switch on the line cord.

I am not finding this towel rack anywhere.. can you confirm - it's a Carrera brand? No other names in the brand name, just that one word - Carrera? And no model number for this unit? There should be, but if you have no packaging or anything for it - it may be tough to locate.

Let me know anything else you may know about the unit and I will be glad to track down the manual for you.

Thanks
Tim

Thermoplastic and thermoset are the two types of powder coatings used by leading Powder coating services. Thermoplastic coating don't undergo any chemical change when heated. Therefore they can be softened and hardened by heating repeatedly. Unlike thermoplastic coatings thermoset coatings changes into infusible materials on heating. Nylons and vinyls are thermoplastic while acrylics and polyesters are thermoset.

Lo batteries or too far away or interference will cause this.

You can adjust it by the length of the pendulum. This lik will walk you through the process: http://usedclockparts.com/9-clock-case-repairs/31-how-to-speed-up-or-slow-down-your-clock-using-it-s-pendulum

This is used to tenderize meat before you cook it. It makes the meat easier to chew and digest. You can also use it before you boil or fry meat. You can do this mechanically, with something like a meat mallet that cuts up the meat fibres. You can do it thermally by putting the temperature really high to break down the connective tissue of the meat. The last method is enzymatic and uses enzymes to break down the collagen. This method is either slow with dry-aging the meat or you can use fruit to marinate the meat.

However, Atomic wallet is available in desktop and mobile versions which provides convenience. And it is a decentralized wallet where you will get private key for every coin you store in it. It is an open source wallet which means no one can infuse any malicious code into it. https://steemit.com/atomic/@abhijeetcg/atomic-wallet-comparison-with-other-existing-crypto-wallets

there are 3 types:watercarbon dioxidedry chemicalto learn more about them go here: http://www.ehs.okstate.edu/modules/exting/Types.htm

replace after fixing the leaking roof

it's likely due to an air lock. Here's what you can do to resolve this issue: Manually Clearing an Airlock: Run the jets on low for about 30 seconds. Then run the jets on high for another 30 seconds. Repeat this process 3 or 4 times. If you hear a gurgling sound and see air bubbling up, continue running your hot tub until it pushes all the air out. If this doesn't work after several attempts, try a different approach. Bleeder Valves or Pump Method: Some spas have bleeder valves that allow you to bleed air out of the lines. First, turn off the spa at the breaker. Access the pump and loosen the valve to allow the air to escape. When the air has bled out (you'll notice it turns from hissing air to a stream of water), close the valve. Run the pump to ensure the jets are now pumping water as expected. Why Are the Jets Not Working on One Side Only?: Many hot tubs have two water pumps. If the jets on only one side of your hot tub stop working, there could be an airlock in only one of the pumps. It could also be a blockage in the jet lines for that side or a problem with the internal mechanism of the jet itself. Can You Use a Spa with an Airlock?: It is not recommended to use a hot tub with an airlock.