Umax Astra - Popular Questions, Answers, Tips & Manuals
Scanner will not calibrate.
Make sure your scanner is connected to your computer with a cable or over the network. Scan your calibration target and save it as an uncompressed TIFF file.
Open the Activities overview and start typing Color.
Click on the Color to open the panel and select your scanner.
It will not turn on. What do I have to do? I bought this some time ago but it has never been used.
I presume this is a scanner that uses a USB connection to your computer. You will find that it does just about nothing until you have it connected both to power and to a computer's USB port. You must also install the appropriate drivers and software. Only then will your computer activate the scanner when you actually try to scan something. The only thing that will activate with only the power cord connected is the scanning lamp inside it so lift the lid and connect the power cord. If the lamp comes on but nothing else, it's just doing what it's supposed to do.
I want to download driver for window 8
You will probably have to try and use the existing XP driver. When installing the driver software in windows 8, make sure you install it in "compatibility mode" and tick "Windows XP R2".
Win.7drivers
Older scanners often do not work with win 7 or in 64 bit. Try hooking it up to an older computer.
4100 driver windows
If you are using windows 7, a lot of older scanners are not recognised, the solution to this is a program called VueScan available from loads of places, just use google to find it. It will work with most scanners and will have a driver that saves you buying a new scanner, I have used it with 10 year old scanners and not had a problem with win 7 32 or 64bit os
4100 driver windows 7 64b
If the UMAX website doesn't have Windows 7 drivers for this scanner you may be out of luck. Some of the older devices are not supported by Win 7.
Not finding what you are looking for?