True Recent Questions, Troubleshooting Help & Support

No,if their was,everyone would know.

I would try this: unplug unit and use a vacuum cleaner and vacuum out the entire area. Not sure what you mean by "running really hard"? If you mean noisy, then see if you can see source after cleaning. Try this and let me know if I can be of any further help.

Most all commercial freezers like yours have, what is called, a fan delay. It is located in the evaporator case and is usually attached on or very close to the actual cooling coil. It may also be a combination switch known as a defrost terminator/ fan delay. It's purpose is to keep from circulating warm air. If the cooling coil does not reach a preset temp, the fans do not come one. Another thing is that the fan motor may just be bad. If you have more than one fan, then chances are that it's going to be the fan delay. I would start there to see that either the fan delay switch is bad or there is a reason that the coil is not getting cold enough to activate the switch.

Hi,

As the weather is getting warmer for many people their freezer and/or refrigerator do not work right because of a dirty condenser coil...

Check out this tip that I wrote about that... it is a great place to start trouble shooting your unit...and something that you can do rather then calling a repair person to do a simple thing for you...

Refrigerator Condenser Coil Cleaning Refrigerator Repair
http://www.fixya.com/support/r4024657-refrigerator_condenser_coil_cleaning

Refrigerator Troubleshooting Refrigerator Compressor
http://www.fixya.com/support/r3885294-refrigerator_troubleshooting

Refrigerator Compressor Start Capacitor and Start Relay
http://www.fixya.com/support/r4023749-refrigerator_compressor_start_capacitor

heatman101

most freezers have 2 controls. 1 is a defrost terminator and the other is a fan delay. the delay and the defrost terminator can sometimes be a "2 in 1" type switch. you would have to study the wiring diagram. The delay will not let the fans come on untill the evap reaches a preset temperature. take another look at the diagram. It may be that the evap is not getting cold enough. you may have a refrigeration issue.

probably needs re gassing and a service

If you wish to get some details; check the site linked here. Pull up older posts...... http://electro-medical.blogspot.com/

fixya is a diy --repair information / question site fixya doesnt go out to locations for repair --need to look for a lic dependable company and or call back company and advise of same problem persists and can they send someone else to fix what they worked on correctly should have a guarantee for the work done --talk to neighboring shops and ask who they use

Check the transport cable tie holding the drain hose together isnt holding the drain water in the tubing.

ask it on face book fixya site doesn't do rumors.

talk with a doctor and get the facts halitosis ( bad breath ) is from bad teeth and infections of the gums , throat infections and gastric reflux